LX200 Datasheet, PDF (1/4 Pages) Artesyn Technologies – Flexible single and muliple outputs

[ 2 YEAR WARRANTY ]
LX200 SERIES
Flexible single and muliple outputs
• 200W continuous, 300W peak output power
• Industry standard footprint, low profile
• Conducted noise to meet EN55022 class B
• AC and DC input voltage options in same package
• Efficiency up to 88%
• Optional power sharing/VME signals board
• Autoranging input option
The LX200 series offers 200 Watts of continuous output power in a low profile
industry standard footprint. With two single output options and a flexible
multiple output version, the series can address most power requirements as
standard. The design is specifically tailored to allow full flexibility and
modifications to meet customer applications can be implemented with relative
ease. The LX200 AC input series meets the safety requirements of EN60950,
VDE0805, UL1950 and CSA C22.2 No. 950. Input conducted noise levels meet
the requirements of FCC and EN55022 class B. LX200 series power supplies
are ideal for use in applications such as point-of-sale equipment, central and
public telecom power systems and network equipment.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Voltage adjustability
Vout on singles
+5V output on multiple
-8%/+16%
±20%
Remote sense
±10%
Line regulation
(LL to HL, FL)
Single outputs
±0.2%
Multiple: +5V output
±0.2%
Multiple: aux. outputs, Note 5 ±0.5%
Load regulation
(20% to 100% FL)
Single outputs:
Multiple: +5V output
Multiple: -5V output
Multiple: ±12V, 24V, Note 5
±0.2%
±1.0%
±4.0%
±2.0%
Cross regulation
5A load step on main output
Auxiliary outputs, Note 5
1.0%
Transient response
25% di/dt 1% max. dev., 1ms recov.
Temperature coefficient Main/single output
±0.02%/°C
Multiple: auxiliary outputs ±0.04%/°C
Overvoltage protection Main/single output 130% ±10% Vout
Output power limit
Multiples:
primary power limited
300W Pout
Singles:
current foldback
105%-120% Iout
Short circuit protection All outputs
Yes
INPUT SPECIFICATIONS
Input voltage range
See Note 3
LX200-46xx models,
(230VAC version)
LX200-76xx models,
autorange version
Drop-out voltage
175 to 264VAC
98 to 132VAC
190 to 264VAC
90VAC
Input frequency
50Hz/60Hz
Input surge current
25A max.
Safety ground
leakage current
115VAC, 60Hz
230VAC, 50Hz
1.6mA
2.5mA
Remote OFF
Logic 0 on ROF
PAGE 1
ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, level A
EN55022, level B
EN61000-4-2, level 3
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 2
Perf. criteria 2
GENERAL SPECIFICATIONS
Hold-up time
110/230VAC
28ms
Efficiency
82% min.
Isolation voltage
Input/output
Input/chassis
3000VAC
1500VAC
Switching frequency Fixed
44kHz
Approvals and
standards
EN60950, VDE0805, UL1950
See Note 7
CSA C22.2 No. 950
Weight
1.3kg (46oz)
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating
Non-operating
0°C to +70°C
–25°C to +85°C
0°C to +40°C ambient,
convection cooled
200W
40°C to 70°C ambient, Derate linearly
convection cooled to 25% full load
Peak (0°C to 40°C, max. 10s) 300W
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Vibration
Operating, 5–50Hz
0.05mm pk-pk
Operating, 50–100Hz 0.025mm pk-pk
Non-operating
100mm drop on
chassis face