|
LPQ352-C Datasheet, PDF (1/4 Pages) Artesyn Technologies – Total Power: 350 Watts | |||
|
POWER
Data Sheet
Total Power: 350 Watts
Input Voltage: 85-264 Vac
120 - 300 Vdc
# of Outputs: Quad
Special Features
ÂÂ Active power factor correction
ÂÂ IEC EN61000-3-2 compliance
ÂÂ Remote sense on 1st and 4th output
ÂÂ Power fail and remote inhibit
ÂÂ Single wire current sharing
ÂÂ Built-in EMI filter
ÂÂ Adjustable floating 4th output
ÂÂ 2 Supervisory output 5 V and 12 V
ÂÂ Overvoltage protection
ÂÂ Overload protection
ÂÂ Thermal overload protection
ÂÂ DC power good
ÂÂ 135 khz switching frequency
ÂÂ Cover -C
ÂÂ Optional with fan cover -CF
ÂÂ Optional end-mounted fan -CEF
Safety
ÂÂ VDE
60950
21310-3336-0001
ÂÂ UL
60950
ÂÂ CSA
CSA 22.2-234 Level 5
LR109492C
ÂÂ NEMKO EN 60950/EMKO-TUE
P97102061 (74-sec) 203
ÂÂ BABT EN60950/BS7002 607019
ÂÂ CB
Certificate and report
4048, 4049
ÂÂ CE
Mark (LVD)
LPQ350 Series
350 Watts
Electrical Specifications
Input
Input range
85-264 VAC; 120-300 VDC
Frequency
47-440 Hz
Inrush current
38 A max, cold start @ 25 °C
Efficiency
75% typical at full load
EMI filter
FCC Class B conducted and radiated
CISPR 22 Class B conducted and radiated
EN55022 Class B conducted and radiated
VDE 0878 PT3 Class B conducted and radiated
Power factor
0.99 typical
Safety ground leakage current 0.5 mA @ 50/60 Hz, 264 VAC input
Output
Maximum power
With cover: 350 W with 30 CFM forced air, (-C) (-CF) (-CEF)
Adjustment range
± 5% min. on main: 3.3-24 V on output 4
Supervisory output
5 V @ 500 mA regulated, 12 @ 150 mA x2
Hold-up time
20 ms @ 350 W load, 115 VAC nominal line
Overload protection
Short circuit protection on all outputs. Case overload protected
@ 110-145% above peak rating
Overvoltage protection
5 V output: 5.7 - 6.7 VDC
|
▷ |