HPD15 Datasheet, PDF (1/3 Pages) Artesyn Technologies – Single, dual and triple output 15 Watt Wide input DC/DC converters

[ 2 YEAR WARRANTY ]
HPD15 SERIES
Single, dual and triple output
• 2.0 x 2.0 x 0.4 inch package (singles and duals)
• 2:1 wide input voltage range
• 30 models available including 2.1V and 3.3V outputs
• Indefinite short circuit protection
• EN55022 conducted emissions level A
• Designed to meet EN60950 and IEC950
The HPD15 series of DC/DC converters offer 15 Watts of output power in a high
density 2 x 2 inch case. A range comprises 30 models with 2:1 wide input
voltages of 9-18V, 18-36V and 36-72VDC. Single, dual and triple outputs are
available with 2.1V and 3.3V single outputs suitable for low voltage logic
requirements. Standard features of the HPD15 series include indefinite short
circuit protection and undervoltage lockout. The series meets EN55022 level A
conducted and radiated emissions. In addition to this, all outputs are regulated
and isolated from the input. Typical applications are on board logic or analog
circuits supplied by telecom distribution power voltages, cellular and
telecommunications systems.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Line regulation
LL to HL, singles and duals
LL to HL, triple output
±0.3%
±1.5%
Cross regulation
Duals: asymmetrical load 4.0% max.
10% to 100% FL
Triples: asymmetrical load 5.0% max.
10% to 100% FL
Load regulation
Singles and duals:
10% to 100% FL
Triples: 10% to 100% FL
±0.2%
±4.0%
Voltage accuracy
±2.0%
Minimum load
2.1V, 3.3V, 5V
50mA max.
Single 12V, 15V
20mA max.
Duals & triples, each output 10% FL
Overshoot
At start-up
3.0% max.
Ripple and noise
20MHz bandwidth 1.5% pk-pk, max.
20mV rms
Temperature coefficient
±0.02%/°C
Short circuit protection Hiccup mode
See Note 4
Indefinite
INPUT SPECIFICATIONS
Input voltage range
12VDC nominal
24VDC nominal
48VDC nominal
9 to 18VDC
18 to 36VDC
36 to 72VDC
Input current
Undervoltage lockout 12V nominal
(dual and triple outputs) 24V nominal
48V nominal
See table
8.5VDC
17VDC
34VDC
Start-up time
200ms
EMC CHARACTERISTICS
Conducted emissions EN55022, FCC part 15
Radiated emissions EN55022, FCC part 15
Level A
Level A
GENERAL SPECIFICATIONS
Efficiency
See table
78% typ.
Isolation voltage
Input/output
500VDC
Isolation resistance
Input/output
10⁹Ω
Isolation capacitance Input/output
1nF
Switching frequency Fixed
180 to 220kHz
Approvals and
standards
Designed to meet
EN60950
IEC950
Case material
Black coated, metal case
Material flammability
UL94V-0
Weight
65g (2.29oz)
MTBF
MIL-HDBK-217F
300,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient -10°C to +50°C
(See derating curve)
Extended temp.,
option, See Note 2
-25°C to +50°C
Non-operating amb. -25°C to +95°C
Case
+95°C max.
Derating
See derating curve
Cooling Free air convection cooled
Relative humidity
Non-condensing
30% to 95%
Altitude
Operating
Non operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.5G rms (approx.)
PAGE 1