EXQ50 Datasheet, PDF (1/2 Pages) Artesyn Technologies – 36-50W High Efficiency DC/DC Converters

EXQ50 Series
Single output
DC/DC CONVERTERS 36-50W High Efficiency DC/DC Converters
• High efficiency topology, 90% at 5V and 86.5% typical at 1.8V
• Low profile, open-frame package
• Industry standard footprint
• Wide operating temperature, -40°C to +90°C
(with derating)
• 90% to 110% output trim
• No minimum load
• Remote on/off
EXQ50 series high-efficiency, open-frame, isolated DC/DC converters have an industry
standard quarter-brick footprint and a height of just 0.4 inches. The converters provide
up to 50 Watts of output power, are capable of delivering very high current at low
voltages, and offer exceptional power densities for today’s high-end applications. The
first four models in the series feature an input voltage range of 33 to 75VDC and are
available with output voltages of 5.0V, 3.3V, 2.5V or 1.8V. The output voltage of each
model is adjustable from 90% to 110% of its nominal value. Typical efficiencies are
90% for the 5V model, 89% for the 3.3V, 88% for the 2.5V and 86.5% for the 1.8V. All
EXQ50 series converters have a remote on/off capability, and are fully protected against
over-voltage, over-temperature and short-circuit conditions. Featuring full international
safety approval, including EN60950 (TÜV Product Service) and UL/cUL 60950, EXQ50
series converters reduce compliance costs and time to market.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
1
TÜV
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Total error
(See Note 8)
4.5%
Set point accuracy
±2.0% max.
Line regulation
Low line to high line
0.3% max.
Load regulation
Full load to min. load
0.3% max.
Voltage adjustability
90% to 110%
Output remote
sense range
(See Note 9)
10%
Minimum load
0A
Overshoot
At turn-on and turn-off
None
Undershoot
None
Ripple and noise
5Hz to 20MHz
120mV pk-pk
30mV rms
Transient response
(See Note 1)
5% max. deviation
200µs recovery to
within total error band
INPUT SPECIFICATIONS
Input voltage range
48Vin nominal
33 to 75VDC
Input current
No load
Remote OFF
60mA
25mA
Input current (max.)
(See Note 3)
1.73A max. @ Io max.
and Vin = 33
Input reflected ripple
(See Note 5)
110mA (pk-pk)
Active high remote ON/OFF
Logic compatibility
ON
OFF
(See Note 7)
Open collector ref to -input
Open circuit or <12VDC
<1.2VDC
Undervoltage lockout
Power up
Power down
32.5V
30.5V
Start-up time
(See Note 6)
Power up
Remote ON/OFF
10ms
3ms
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
Immunity:
ESD air
ESD contact
EFT DC Input
Radiated field enclosure
Conducted (DC power)
Conducted (signal)
Input transients
EN55022 (See Note 2)
EN55022 (See Note 2)
EN55022
EN61000-4-2
EN61000-4-2
EN61000-4-4
EN61000-4-3
EN61000-4-6
EN61000-4-6
ETS 300 132-2, ETR 283
Level A
Level B
Level A
8kV, 15kV
6kV, 8kV
2kV (NP)
10V/m
10V (NP)
10V (NP)
GENERAL SPECIFICATIONS
Efficiency
See table
Operational insulation Input/output
1500VDC
Switching frequency
Fixed
350kHz
Approvals and
standards (See Note 4)
EN60950 (TÜV Product Service)
UL/cUL60950
Material flammability
UL94V-0
Weight
25g (0.88oz)
MTBF
MIL-HDBK-217F
@ 40°C, 100% load
ground benign
>292,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating temperature -40°C to +90°C
Non-operating
-40°C to +125°C
File Name: EXQ50S.PDF Rev: 01 Nov 2002