|
DS460S-3-002 Datasheet, PDF (1/5 Pages) Artesyn Technologies – Total Output Power: 460 Watts | |||
|
POWER
Data Sheet
Total Output Power: 460 Watts
+12 Vdc Stand-by Output
Wide Range Input Voltage:
90 - 264 Vac
Special Features
ÂÂ Active power factor correction
ÂÂ EN61000-3-2 harmonic compliance
ÂÂ Active AC inrush control
ÂÂ 1U X 2U form factor
ÂÂ +12 Vdc output
ÂÂ +12 Vdc stand-by
ÂÂ Hot plug operation
ÂÂ N + 1 redundant
ÂÂ Active current sharing
ÂÂ Built-in cooling fan
ÂÂ I2C communication interface bus
ÂÂ PMBus compliant
ÂÂ EEPROM for FRU data
ÂÂ Two years warranty
Safety
ÂÂ UL/cUL 60950 (UL Recognized)
ÂÂ NEMKO 60950
ÂÂ Cb Certificate and report
ÂÂ CE Mark (LVD)
DS460S
460 Watts
Electrical Specifications
Input
Input raÂnge:
90 - 264 Vac
Frequency:
47 - 63 Hz, single phase AC
Inrush current:
30 Apk maximum inrush current
Efficiency:
92% typical at high line 50% load
Conducted EMI:
FCC Subpart J EN55022 Class A
Radiated EMI:
FCC Subpart J EN55022 Class A
Power factor:
0.99 typical
Leakage current:
1.0 mA @ 240 Vac
Hold up time:
10 ms minimum
Output
Main DC voltage:
+12.3 V @ 36.0 A
Stand-By:
+12 V @ 2.3 A
Adjustment range:
Factory Set
Regulation:
11.85 - 12.45 Vdc
11.40 - 12.6 Vdc
Overcurrent:
+12 Vdc; latches off if overcurrent lasts over 1 second,
Trip point 120% - 150% of rated current.
Overvoltage:
+12 Vdc; 13.6 - 15.0 Vdc
+12 Vsb; 13.6 - 15.0 Vdc
Turn-on delay:
1 - 1.5 seconds
Main output rise time:
10 - 30 mS, monotonic rise
|
▷ |