DPS50 Datasheet, PDF (1/2 Pages) Astec America, Inc – DPS50 Series

POWER
Data Sheet
DPS50
60 Watts
Total Power: 30 - 60 Watts
Input Voltage: 90 - 264 Vac
127 - 300 Vdc
# of Outputs: Single
Special Features
ƒƒ CE Mark EMC & LVD (except DPS52)
ƒƒ Universal AC input
ƒƒ Fully regulated output
ƒƒ Overload and short circuit protection
ƒƒ Internal remote sense
to the output plug
ƒƒ Constant voltage
ƒƒ Level V efficiency (except DPS52)
ƒƒ High MTBF
ƒƒ IEC320 AC receptacle, 3 pin (type C14)
ƒƒ Built in EMI filter (CISPR 22 Class B)
ƒƒ LED power good indicator
ƒƒ Input power < 74 watts
ƒƒ Complies with EN61000-3-2
ƒƒ Meets Energy Star
Safety
ƒƒ UL
ƒƒ CSA
ƒƒ VDE
ƒƒ CE
ƒƒ CB
ƒƒ PSE
UL 60950-1
CSA-C22.2 no.60950-1
EN60950-1
EMC, LVD & ErP 2011
(except DPS52)
Certificate and report
Denan 06-03051012
Electrical Specifications
Input
Input range
90 - 264 Vac (wide range)
Frequency
127 - 300 Vdc
Inrush current
47-440 Hz
Input current
< 60 A @ 230 Vac, cold start @ 25 °C
Efficiency
< 2.0 A rms @ 115 Vac; < 1 A @ 230 Vac
EMI/RFI
80% @ full load typical, @115 Vac
Safety ground leakage current FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B
0.5 mA @ 50/60 Hz, 264 Vac input
Output
Maximum Power (Po)
60 W (DPS52, 30 W)
Hold-up time
10ms. typical at full load @ 115 Vac
Overvoltage protection
20% - 45% above nominal output maximum
Latching type, recycle AC to reset.
Overcurrent protection
Output short circuit protection auto recover
Overload protected @ 120 - 150% above maximum rating
Cable/connector
DC cable with 2.5 mm center plug
DC plug center +v
DC plug outer -v
Environmental Specifications
Operating temperature:
0° to +40 °C ambient. -20 °C start up
Storage temperature:
-40 °C to +85 °C
Electromagnetic susceptibility: Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, level 3
Humidity:
Operating; non-condensing 5% to 90% RH
Vibration:
Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz to
500 Hz, operational
MTBF demonstrated:
> 550,000 hours at full load and 25 °C ambient conditions