|
DP4009N3M Datasheet, PDF (1/2 Pages) Artesyn Technologies – DP40 40 Watts | |||
|
POWER
Data Sheet
DP40
40 Watts
Total Power: 40 Watts
Input Voltage: 90 - 264 Vac
127 - 300 Vdc
# of Outputs: Single
SPECIAL FEATURES
ÂÂ Medical and ITE safeties
ÂÂ Universal AC input
ÂÂ Fully regulated output
ÂÂ Overload and short circuit protection
ÂÂ Constant voltage
ÂÂ High efficiency
ÂÂ High MTBF
ÂÂ IEC320 AC input receptacle
3 pin (type C14) Class I
2 pin (type C8) Class II
ÂÂ Built in EMI filter (CISPR 22 Class B)
ÂÂ LED power good indicator
ÂÂ Input power <49 watts
ÂÂ Complies with EN61000-3-2
ÂÂ Meets Energy Star Efficiency Level V
ÂÂ CE Mark EMC, LVD & ErP 2011
ÂÂ Less than 300 mW No-Load power
consumption
SAFETY
ÂÂ UL
ÂÂ cUL
ÂÂ TUV
ÂÂ CE
ÂÂ CB
ÂÂ CCC
60950-1, 60601-1
60950-1, 60601-1
60950-1, 60601-1
EMC, LVD & ErP 2011
Certificate and report
China Approval
Electrical Specifications
Input
Input range
90 - 264 Vac (wide range)
127 - 300 Vdc
Frequency
47 - 63 Hz
Inrush current
< 50 A @ 230 Vac, cold start @ 25 °C
Input current
< 0.5 A rms @ 115 Vac; < 0.25 A @ 230 Vac
Efficiency
84% @ full load typical, @115 Vac
EMI/RFI
FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B
Safety ground leakage current 300 μA @ 50/60 Hz, 264 Vac input for 3 pin model
100 μA @ 50/60 Hz, 264 Vac input for 2 pin model
Output
Maximum power (Po)
40 W
Hold-up time
10 ms. typical at full load @ 115 Vac
Overvoltage protection
20% - 45% above nominal output maximum
Latching type, recycle AC to reset.
Overload protection
Output short circuit protection auto recover
Overload protected @ 110 - 160% above peak rating
Cable/connector
1.2 m DC cable with 2.5 mm I.D, 5.5 mm O.D center plug
DC plug center +v
DC plug outer -v
Environmental Specifications
Operating temperature
0 ° to +40 °C ambient. Derate each output as 2.5% per degree
from 40 °C to 60 °C. -20 °C start up
Storage temperature
-40 °C to +85 °C
Electromagnetic susceptibility Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3
Humidity
Operating; non-condensing 10% to 90% RH
Vibration
Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz
to 500 Hz, operational
MTBF demonstrated
> 550,000 hours at full load and 25 °C ambient conditions
|
▷ |