DCH2 Datasheet, PDF (1/3 Pages) Emerson Network Power – Switching wallmount power supply 2 Watts

POWER
Data Sheet
DCH2 Series
2 Watts
Total Power: 2 Watts
Input Voltage: 90 - 264 Vac
# of Outputs: Single
SPECIAL FEATURES
ƒƒ Switching wallmount power supply
ƒƒ Available in multiple AC plug
configurations
ƒƒ CE Mark EMC & LVD
ƒƒ Universal AC input
ƒƒ Overload and short circuit protection
ƒƒ Constant voltage, constant current
output
ƒƒ Built in EMI filter (CISPR 22 Class B)
ƒƒ No load power consumption < 300 mW
SAFETY
ƒƒ UL
ƒƒ CSA
ƒƒ TUV
ƒƒ NEMKO
ƒƒ CB
ƒƒ CE
60950/6500
60950
60950
60950
Certificate and report
EMC & LVD
Electrical Specifications
Input
Input range
Frequency
90 - 264 Vac (wide range)
47 - 63 Hz
EMI/RFI
FCC Part 15, Subpart B Class B & EN55022
(CISPR 22) Class B & EMC89/336/EEC
Safety ground
leakage current
10 μA @ 50/60 Hz, 230 Vac input
Output
Voltage (Vo)
Maximum power (Po)
Hold-up time
Overvoltage protection
Overload protection
6.5 V (6.5 - 10 V)
2W
12 ms typical at full load @ 115 Vac
25% above nominal output maximum; Latching type
Output short circuit protection auto recover
Overload protected > 2 A
Output cable/connector DC cable with 2.8 mm x 5.5 mm barrel plug right angle
barrel polarity
DC plug center +V; DC plug outer -V
Environmental Specifications
Operating temperature
0° to 45 °C ambient
Storage temperature
-30 °C to +85 °C
Electromagnetic susceptibility Designed to meet EN55082-1
Humidity
Operating; non-condensing 20% to 90% RH
Vibration
Per IEC 60068-2-6