BXB150 Datasheet, PDF (1/2 Pages) Artesyn Technologies – 100-150W Wide Input DC/DC Converters

BXB150 Series
Single output
DC/DC CONVERTERS 100-150W Wide Input DC/DC Converters
1
• Industry standard footprint
• MTBF >1.4 million hours (Bellcore 332)
• Input voltage to ETS300-132-2
• Adjustable output voltage
• No minimum load required
• Separate case ground pin
• 2:1 input range for battery powered applications
• Undervoltage lockout (UVLO)
• UL, VDE and CSA safety approvals
The BXB150 Series are high power density DC/DC converters packaged in the industry
standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when
specifying for both new and replacement designs. Suitable for a wide range of
applications in nearly any industry, the BXB150 was particularly designed with
communication and distributed power applications in mind. Using Bellcore 332, the
MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four
threaded M3 inserts makes heatsink attachment and optimum thermal management
easy. The BXB150 series is approved to IEC950 by UL, CSA and VDE.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
60% to 110%
Set point accuracy
±1.0%
Line regulation
Low line to high line
±0.05%
Load regulation
Full load to min. load
±0.10%
Minimum load
0%
Overshoot
At turn-on and turn-off
None
Undershoot
None
Ripple and noise
(5Hz to 20MHz)
(See Note 1)
3.3V and 5V
12V and 15V
75mV pk-pk,
20mV rms
100mV pk-pk,
30mV rms
Temperature coefficient
±0.01%/°C
Transient response
(See Note 2)
±2.0% max. deviation
170µs recovery
to within ±1.0%
Remote sense
0.5VDC transmission
line drop compensation
INPUT SPECIFICATIONS
Input voltage range
24Vin nominal
48Vin nominal
18 to 36VDC
36 to 75VDC
Input current
No load
Remote OFF
130mA max.
20mA max.
Input current (max.)
(See Note 4)
24Vin
48Vin
9.0A max. @ Io max.
and Vin = 0 to 75V
6.5A max. @ Io max.
and Vin = 0 to 75V
Input reflected ripple
(See Note 6)
5mA pk-pk
Active low remote ON/OFF
Logic compatibility
ON
OFF
(See Note 7)
Open collector ref to -input
1.2VDC max.
Open circuit
INPUT SPECIFICATIONS (continued)
Undervoltage lockout
Start-up time
(See Note 8)
24Vin: power up
24Vin: power down
48Vin: power up
48Vin: power down
Power up
Remote ON/OFF
17V
16.3V
34V
32.5V
20ms
20ms
EMC CHARACTERISTICS
Conducted emissions
(See Note 3)
Bellcore 1089
FCC part 15
EN55022, CISPR22
Level A
Level A
Level A
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input/case
Input/output
Output/case
1500VDC
1500VDC
1500VDC
Switching frequency
Fixed
500kHz typ.
Approvals and
standards (See Note 5)
VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
Case material
Aluminum baseplate
with plastic case
Material flammability
UL94V-0
Weight
110g (3.88oz)
MTBF
Bellcore 332
1,400,000 hours
MIL-HDBK-217F 580,000 hours min.
@ 40°C, 100% FL
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating case temp. -40°C to +100°C
Non-operating
-55°C to +125°C
Altitude
Operating
Non-operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.4G rms (approx.)
File Name: BXB150.PDF Rev: 01 Jan 2000