AIF04ZPFC-01L Datasheet, PDF (1/3 Pages) Artesyn Technologies – Total Power: 1600 Watts

POWER
Data Sheet
Total Power: 1600 Watts
120 - 370 VDC
(Configurable)
Input Voltage: 85 - 264 VAC
# of Outputs: Single
AIF - PFC Series
1600 Watts
SPECIAL FEATURES
ƒƒ Unity power factor
ƒƒ High efficiency - up to 95%
ƒƒ Universal input voltage and
frequency range
ƒƒ Up to 1600 W output power
ƒƒ Positive and Negative enable
function
ƒƒ Parallelable with accurate current
sharing
ƒƒ <10% harmonic distortion conform-
ing to IEC1000-3-2 Compliance
ƒƒ 100°C baseplate operating
temperature
ƒƒ DC Input option
ƒƒ Power fail warning signal
ƒƒ Enable output to control DC-DC
Converter
ƒƒ EEPROM data storage via I²C
Interface
ƒƒ External inrush current limited
protection
ƒƒ Power density up to 290 W/in³
ƒƒ Two year warranty
SAFETY
ƒƒ UL
ƒƒ cUL
ƒƒ TUV
60950 Recognized
60950 Recognized
EN60950 Licensed
Electrical Specifications
Input
Input range
85 - 264 Vac / 120 - 370 Vdc (configurable)
Input surge
290 Vac / 1s
Input Frequency
50/60 Hz
Efficiency
95% @ 230 Vac, 1600 W (typical)
Total Harmonic Distortion Less than 10%
Power Factor
0.99 typical (Po ± 500 W); 0.97 typical (Po ± 1000 W)
Output
Output Voltage
Current Share Accuracy
380V typical (Io =4.2 A / Vi > 180 Vac); 393 V typical (Io = 0A)
Note: Vin peak must always be lower than Vout
10% max
Overvoltage Protection
Power Limit for AC input
for DC input
Control
430 max
Vin = 85 Vac, Pmax = 1000W; Vin = 230 Vac, Pmax = 1600W Case;
Vin = 370 Vdc, Pmax =1600W
Power Fail Warning
Direct drive output to opto-isolator
Power Fail Warning Adjust 195 to 355 Vdc adjustable
LD Enable
Direct drive output to opto-isolator
PFC Enable
TTL compatiable
Voltage Adjust
76% to 100% Vo
DC Input Enable
Clock Input (external sync) 6 Vp-p typical @ 1 MHz ± 5%
Clock Output (int. clock)
6 Vp-p typical @ 1 MHz ± 5%
Temperature Monitor Output 10 mV/°C
Current Monitor Output
0 to 1 mA (1 mA = 4.2 A output)
I²C Interface
Notes: Nominal values apply with sense pins disconnected and other control pin unconnected.