AFE2000 Datasheet, PDF (1/3 Pages) Artesyn Technologies – Single output

[ 2 YEAR WARRANTY ]
AFE2000 SERIES
Single output
• Approved to EN61000, IEC-1000, UL1950,
CSA 22.2 No. 950-95
• Operating ambient temperature of 0°C to +50°C
• Complies with ETS300 132-1 and EN61000-3-2
• Hot-swap capability
• 11.5 x 6.75 x 4.9 inch size
• N+1 redundancy capability
• Extensive features available
• Compatible with AFS standard shelves for configuring
rack-mounted power systems
The AFE2000 power module is a rack mountable single phase AC to DC power
supply, designed to be a cost-competitive front-end power supply for distributed
power systems. It is particularly suitable for use in data processing, datacom and
telecom applications. The outputs are floating so the end user can ground the plus,
minus or neither depending on the end use application. The AFE2000 power modules
are designed for hot-swap operation and can be mounted into AFS4000/6000 power
shelves for redundant-mode operation.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Output voltage
Main: 48/54.5/56.2VDC
Auxiliary: 12VDC
±1.0%
±1.0%
Output power
Main
Auxiliary
2000W
12W
Regulation
Line, load, IT, ageing
±3.0%
Turn-on
Output rise time
100 to 400ms
Turn-on (AC applied)
4s max.
Turn-on (inhibit removed) 1.5s max.
Ripple and noise
(<50MHz)
480mV pk-pk
Transmission noise
100 to 3kHz
35dBrnC
Overvoltage protection
60VDC max.
Undervoltage protection >44.5VDC
<42VDC for >5s
Delivers full power
Latch-off
Short circuit protection <30s
>30s
Automatic recovery
Latch-off
Current sharing
Active current share
(50% to 100% loading)
±10%
Remote sense
1.0V max. distribution line loss
INPUT SPECIFICATIONS
Input voltage range
200/240VAC nom.
170 to 264VAC
Input frequency range 50/60Hz nom.
47Hz to 63Hz
Input surge current
25°C cold start
22A
Safety ground
leakage current
254VAC @ 60Hz
1.5mA max.
0.5mA typ.
Input current
220VAC, 2000W
10.5A rms
Power factor
0.99 min.
PAGE 1
EMC CHARACTERISTICS
Conducted emissions FCC-CFR, part 15, subpart B Class B
CISPR 22
Class B
Radiated emissions
Immunity - conducted
Immunity - radiated
Immunity - ESD
Line harmonics
FCC-CFR, part 15, subpart B (Note 7)
CISPR 22
(Note 7)
IEC1000-6
IEC1000-3
IEC1000-2
per EN61000-3-2
Level 2
Level 3
Level 3
Compliant
GENERAL SPECIFICATIONS
Hold-up time
(See Note 1)
150 to 170VAC
0 to 150VAC
500ms
20ms
Efficiency
86%
Isolation voltage
Input/output
Input/chassis
Output/chassis
3000VAC
1500VAC
100VAC
Switching frequency
200kHz
Approvals and
standards
EN60950, IEC950, UL1950
CSA C22.2 No. 950
Case material
Electrolytic zinc coated CRS,
ASTM A591, light beige paint
Weight
5.0kg (11Ibs)
MTBF
MIL-HDBK-217E
Demonstrated
150,000 hours
300,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient
0°C to +50°C
Non-operating
-40°C to +100°C
Cooling
Forced air
Relative humidity
Operating
5% to 95% RH
Altitude
Operating
13,000 feet max.
Vibration
5Hz to 500Hz
0.75G rms peak
Shock
15G, 1/2 Sine, 11ms