T-90 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – DIP Extractor Tool DIP-R-SIZER™ Tool

P/N T-90
DIP Extractor Tool
FEATURES
• An extremely handy, economical tool for removing ICs from DIP sockets.
• Reduces the risk of pin damage associated with stubborn IC removal as well as
finger injury.
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
P/N T-516AS
DIP-R-SIZER^™ Tool
FEATURES
• The DIP-R-SIZER™ tool straightens DIP IC legs on 0.300 [7.62] or 0.600 [15.24]
centers with one easy squeeze.
• Place 0.300 [7.62] center ICs in one side of tool, 0.600 [15.24] center ICs in the
other and just squeeze the handles together.
• Brings leads into tolerance – 0.320 [8.12] or 0.620 [15.74]
• The T-561AS tool is constructed from anti-static plastic.
ALL DIMENSIONS: INCHES [MILLIMETERS]
SEE DATA SHEETS 16005 FOR SERIES 680 PROGRAMMABLE
HEADER.
SEE DATA SHEETS 16004 FOR SERIES 675 PROGRAMMABLE
HEADER.
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
ORDERING INFORMATION
Specify P/N T-90 DIP Extractor
Specify P/N T-516AS DIP-R-Sizer^™
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
22003
Rev. AB