SP200_11 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – Shorting Plugs and Jacks

Series SP200 & SJ200 0.040 [1.02]
Shorting Plugs and Jacks
FEATURES
• These Shorting Plugs and Jacks are used in conjunction with Aries DIP Strips,
available separately, for your programming needs. Consult Data Sheet 16007 and
Data Sheet 16008 for details.
• Convenient handle for insertion and withdrawal.
• Jacks available in both RoHS and Sn/Pb versions
SHORTING JACK (SJ200) SPECIFICATIONS
• BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
• PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00
• PIN BODY PLATING: 200μ [5.08μm] min. Sn per ASTM B545 Type 1 over 100μ
[2.54μm] min. Ni per SAE-AMS-QQ-N-290 -OR- 200μ [5.08μm] min. 93/7
Sn/Pb per ASTM B545 over 100μ [2.54μm] min. Ni per SAE-AMS-QQ-N-290
• 4-FINGER COLLET CONTACT: Be-Cu per UNS C17200 ASTM-B194-01
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
• CONTACT PLATING: 30μ [0.76μm] min. Au per MIL-G-45204 over 50μ
[1.27μm] min. Ni per SAE-AMS-QQ-N-290
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
• CONTACT CURRENT RATING: 8 amps
• OPERATING TEMPERATURE: -67°F to 221°F [-55° to 105°C]
• INSERTION FORCE: 240 grams/pin
• WITHDRAWAL FORCE: 130 grams/pin
• NORMAL FORCE: 210 grams/pin, based on a 0.040 [1.02] dia. test lead
• ACCEPTS LEADS: 0.032-0.047 [0.81-1.19] in dia., 0.130-0.180 [3.30- 4.56] long
SHORTING PLUG (SP200) SPECIFICATIONS
• BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
• PIN: Brass 260 1/4- or 1/2-hard
• PIN PLATING:10μ [0.25μm] Au per MIL-G-45204 over 50μ [1.27μm] Ni
per SAE-AMS-QQ-N-290
ORDERING INFORMATION
• CONTACT CURRENT RATING: 5 amps
• OPERATING TEMPERATURE: -67°F to 221°F [-55° to 105°C] _{JACKS – Specify P/N SJ200 (RoHS) or P/N SJ200-TL (Sn/Pb)}
which are used with Aries MALE DIP STRIPS, Series M40, see
ALL DIMENSIONS IN INCHES [MILLIMETERS]
ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED
DATA SHEET 16007 for details.
PLUGS – Specify P/N SP200 which is used with Aries FEMALE DIP
STRIPS, Series F40, see DATA SHEET 16008 for details.
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
16009
1 of 1
Rev. AB