84-537-21 Datasheet, PDF (1/2 Pages) Aries Electronics, Inc. – ‘Live Bug’ Type Universal PLCC ZIF Test Socket

Series 537 ‘Live Bug’ Type
Universal PLCC ZIF Test Socket
FEATURES
• This Universal PLCC ZIF Test Socket will take seven sizes of PLCC footprints with
Aries Insert Plate, P/N XX-537-20, see Data Sheet 10012 for additional Insert Plates
• The PLCC is inserted ‘live bug’ (pins down) into the position over the bed; the top
half of the clamshell is closed for testing, programming, etc. The bottom solder tail
pins are the ends of the contacts or “bed,” thus permitting mounting to a PC board.
• Accepts JEDEC MO-047AA-AH PLCC’s and JEDEC MO-044AA-AB ceramics with
20, 28, 44, 52, 68, or 84 square leads, as well as JEDEC MS-016 PLCC’s with 32
rectangular leads.
GENERAL SPECIFICATIONS
• PLASTIC: black UL 94V-0 glass-filled Polyphenylene Sulfide (PPS)
• CONTACT PIN: BeCu 172 heat-treated
• CONTACT PLATING: 12μ [0.31μ] min. Au per MIL-G-45204 over 100μ [2.54μ]
min. Ni per SAE AMS-QQ-N-290 over 20μ [0.51μ] Cu per MIL-C-14550
• HARDWARE: Stainless Steel
• OPERATING TEMPERATURE: 85°F to 257°F [-65°C to 125°C]
• LIFE CYCLE: 10,000 insertions max.
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.032 ±0.002 [0.81 ±0.05] dia.
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
P/N 84-537-21 Socket Only, No Insert Plates
P/N 84-537-21-7 for Socket & All 7 Insert Plates
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
10010
1 of 2
Rev. AA