64-304121-00 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – 64-Pin 0.5mm TQFP-to-0.8mm QFP Adapter

P/N 64-304121-00 64-Pin 0.5mm
TQFP-to-0.8mm QFP Adapter
FEATURES
• A cost-effective means of upgrading without changing your PCB layout.
GENERAL SPECIFICATIONS
• BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides
• PINS: 301 full-hard Stainless Steel
• PIN PLATING: 200µ [5.08µ] Sn/Pb 90/10 MIL-P-81728 over 100µ [2.54µ] Ni
per SAE AMS-QQ-N-290
• OPERATING TEMPERATURE: 221ºF [105ºC]
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
64-304121-00
64-304121-00-P = Panelized Version
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18068
Rev. AA