44-305263-20-P Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – 44-Pin 0.8mm QFP-to-44-Pin PLCC Adapter

44-Pin 0.8mm
QFP-to-44-Pin PLCC Adapter
FEATURES
• A cost-effective means of upgrading to QFP without changing your PCB layout.
GENERAL SPECIFICATIONS
• BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides
• PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
• PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ]
Ni per SAE AMS-QQ-N-290
• OPERATING TEMPERATURE: 221ºF [105ºC]
MOUNTING CONSIDERATIONS
• Standard PLCC SMT pads
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
ORDERING INFORMATION
44-305263-20-P
Optional Panelized Version
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18081
Rev. AA