28-652000-10 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – PLCC-to-DIP Adapter

Series 652000 and 653000
PLCC-to-DIP Adapter
FEATURES
• Converts PLCC packaged ICs to DIP footprints.
• Ideal for prototyping and testing/evaluation.
• Available with PLCC sockets or PLCC pads on top side.
• Consult factory for Panelized Form or for mounting of consigned ICs.
GENERAL SPECIFICATIONS
• ADAPTER BODY: FR-4, 0.062 [1.58] thick, with 1-oz. Cu traces
• PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
• PIN PLATING: Sn/Pb 93/7 is 200µ [5.08µ] per ASTM B579-73 over 100µ
[2.54µ] Ni per SAE-AMS-QQ-N-290 with 10µ [0.254µ] Au per MIL-G-45204
over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290
• OPTIONAL PLCC SURFACE MOUNT SOCKET: UL 94V-0 PPS
• SOCKET CONTACTS: Phosphor Bronze, Sn-plated
• CURRENT RATING: 1 amp
• OPERATING TEMPERATURE: 221°F [105°C]
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia.
• Will plug into Standard IC Socket
• See Table for Pad Layout when mounting PLCC socket
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
XX-65X000-1 X
No. of Pins
28, 32, 44, 68, 84
Series
652000: without socket
653000: with socket
Plating
0 = Sn/Pb
1 = Au
Solder Tail Pin
Pins Dim. “A”
Dim. “B”
Dim. “C”
Dim. “D”
Dim. “W”
Dim. “X”
Dim “Y”
±0.003 [±0.08] ±0.003 [±0.08] ±0.003 [±0.08]
non-cumulative non-cumulative
28 1.400 [35.56] 1.300 [33.02] 0.705 [17.91] 0.703 [17.86] 0.300 [7.62] 0.300 [7.62] 0.449 [11.41]
32 1.600 [40.64] 1.500 [38.10] 0.705 [17.91] 0.805 [20.45] 0.400 [10.16] 0.300 [7.62] 0.549 [13.95]
44 2.200 [55.88] 2.100 [53.34] 0.910 [23.11] 0.910 [23.11] 0.500 [12.70] 0.500 [12.70] 0.670 [17.02]
68 3.400 [86.36] 3.300 [88.32] 1.220 [30.99] 1.220 [30.99] 0.800 [20.32] 0.800 [20.32] 0.945 [24.00]
84 4.200 [106.68] 4.100 [104.14] 1.420 [36.07] 1.421 [36.09] 1.000 [24.40] 1.147 [29.13] 1.147 [29.13]
Dim. “Z”
±0.003
[±0.08]
0.449 [11.41]
0.448 [11.39]
0.670 [17.02]
0.945 [24.00]
1.147 [29.13]
Pad Size
0.024 x 0.076 [0.61 x 1.93]
0.024 x 0.076 [0.61 x 1.93]
0.026 x 0.076 [0.66 x 1.93]
0.026 x 0.076 [0.66 x 1.93]
0.026 x 0.080 [0.66 x 2.03]
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18014
Rev. AA