28-0508-20 Datasheet, PDF (1/2 Pages) Aries Electronics, Inc. – Series X508 Single and Dual Row Collet Sockets with Wire Wrap Pins

Series X508 Single and Dual Row
Collet Sockets with Wire Wrap Pins
FEATURES:
• Aries collet sockets are available in single or dual rows.
• Cuttable to the number of pins desired to fit the
application.
• Side-to-side and end-to-end stackable.
SPECIFICATIONS:
• Body material is black UL 94V-0 Nylon 4/6.
• Pin body is Brass Alloy 360 1/2 hard per UNS C36000 ASTM-B16-00.
• Pin body plating is either 10 μ [.25μm] min. Gold per MIL-G-45204 or
200μ [5.08μm] min. 93/7 Tin/Lead per ASTM B545 or 200μ [5.08μm]
min. Tin per ASTM B545 Type 1 over 100μ [2.54μm] min. Nickel per
SAE-AMS-QQ-N-290.
• 4-fingered collet contact is Beryllium Copper Alloy per UNS C17200
ASTM-B194-01.
• Contact plating is either 200 μ [5.08μm] min. 93/7 Tin/Lead per ASTM
B545 or 200μ [5.08μm] min. Tin per ASTM B545 Type 1 or 10μ
[.25μm] min. Gold per MIL-G-45204 over 50 μ [1.27μm] min. Nickel per
SAE-AMS-QQ-N-290.
• Contact current rating=3 Amps.
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
• Operating Temp. = -67°F to 221°F [-55°C to 105°C] Tin
= -67°F to 257°F [-55°C to 125°C] Gold
ORDERING INFORMATION
• Insertion Force=180 grams/pin; Withdrawal Force=90 grams/pin;
Normal Force=140 grams/pin; based on a .018 [.46] dia. test lead.
• Accepts leads .015-.025 [.38-.64] in diameter, .110-.160 [2.79-4.06]
long.
MOUNTING CONSIDERATIONS:
• Suggested PCB hole size=.045 ± .002 [1.14 ± .05] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
“A”=(NO. OF PINS PER ROW) X .100 [2.54]
“B”=(NO. OF PINS PER ROW - 1) X .100 [2.54]
XX-X508-XXXX
No. of pins:
Single row: 1-40 pins
Dual row: 2-40 pins
0=Single row
1=Dual row
Series
Plating:
0=Gold collet/Tin
shell
0TL=Gold collet/
Tin/Lead shell
1=Gold collet/Gold
shell
2=2 level wire wrap
3=3 level wire wrap
All tolerances ± .005 [.13]
unless otherwise specified
Consult Data Sheet No. 12020
for Series X518 Collet Sockets
with solder tail pins.
2 LEVEL
3 LEVEL
http://www.arieselec.com • [e-mail]
NORTH AMERICA
Bristol, PA USA
TEL: [phone]
FAX: [phone]
abc EUROPE
TEL: [phone]
FAX: [phone]
[e-mail]
12021
REV. F
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED