24001 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – RF Test Socket w/Replaceable Contact Strips

RF Test Socket
w/Replaceable Contact Strips
FEATURES
• User replaceable patented Microstrip™ contacts which lie flat on the DUT board,
and become part of the transmission line decreasing down-time.
• Same high-frequency performance of our standard Microstrip™ contacts.
• Available in Pb pitches from 0.4mm to 5.0mm.
• Easy to use removal and insertion tool shipped with every order.
• Replaceable contact strips available in just 1 week.
• Socket alignment pins provide accurate socket location to test board.
• Frequency response data available up to 19GHz.
GENERAL SPECIFICATIONS
• SOCKET BODY MATERIAL: either PEEK or Torlon® PAI
• HARDWARE: Stainless Steel
• CONTACT RESISTANCE: <70 mΩ
• CONTACT INDUCTANCE: 0.01nH
• ESTIMATED CONTACT LIFE: 500,000 cycles
• CONTACT FORCE: Consult Factory
• INSERTION LOSS: <1dB to 16.7GHz (at 0.50mm pitch).
MOUNTING CONSIDERATIONS
• SUGGESTED MOUNTING HOLE SIZE: 0.120 [3.05] 4 places for #4-40 Screws
• SUGGESTED LOCATING PIN HOLE SIZE: 0.063 [1.6] 4 places
• SUGGESTED TEST BOARD PLATING: 30µ min. hard Au over 50µ min. Ni
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
Consult Facotry for P/N
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
24001
Rev. AA