|
24-516-11S Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – Zero-Insertion-Force Socket | |||
|
Series 516
Zero-Insertion-Force Socket
FEATURES
⢠A choice of 24-, 28-, or 40-pin count devices can be inserted without bending or
otherwise damaging the legs, since no force is required to either insert or remove
the component from the socket.
⢠Contacts are normally open and are closed by a unique cam action controlled by
dual lever arms.
⢠The last 15° of movement of the cam provides a wiping action to the contacts on
the legs of the device to remove any residue, ensuring a gas-tight seal.
⢠Tapered entry helps guide the device legs into the mating position with the contacts.
GENERAL SPECIFICATIONS
⢠BODY, HANDLE, CAM: black UL 94V-0 glass-filled 4/6 Nylon
⢠PINS: BeCu 170 or 172, 1/2-hard
⢠PIN PLATING: 10μ [0.254μ] min. Au per MIL-G-45204 over 50μ [1.27μ] min. Ni
per SAE AMS-QQ-N-290
⢠CONTACT CURRENT RATING: 1 amp
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
⢠OPERATING TEMPERATURE: 257°F [125°C]
⢠MINIMUM RETENTION FORCE (when closed): 15g/lead, based on a 0.008 ORDERING INFORMATION
[0.20] thick test lead
⢠ACCEPTS: most lead widths with lengths from 0.075 to 0.250 [1.91 to 6.35]
XX-516-11 X
MOUNTING CONSIDERATIONS
⢠SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia.
Pins
24, 28, 40
Series
Optional Suffix
S = Short Lever Arm
M = Midget Lever Arm
Plating
11 = Au over Ni
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
âAâ = (NO. OF PINS PER ROW x 0.100 [2.54]) + 0.220
âBâ = (NO. OF PINS PER ROW -1) x 0.100 [2.54]
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
SERIES 526 Lo-PRO®FILE ZIF SOCKET ALSO AVAILABLE CONSULT
DATA SHEET 10018
No. of Pins
24
28
40
Dim. âCâ
0.785 [19.94]
0.785 [19.94]
0.780 [19.81]
Standard Lever Arm
Dim. âDâ
Dim. âEâ
0.76 [19.30]
0.76 [19.30]
0.76 [19.30]
0.630 [16.00]
0.630 [16.00]
0.630 [16.00]
Short Lever Arm
Dim. âDâ
Dim. âEâ
0.60 [15.24]
0.60 [15.24]
0.60 [15.24]
0.520 [13.21]
0.520 [13.21]
0.520 [13.21]
Midget Lever Arm
Dim. âDâ
Dim. âEâ
0.41 [10.41]
0.41 [10.41]
0.41 [10.41]
0.42 [10.67]
0.42 [10.67]
0.42 [10.67]
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 ⢠FAX (215) 781-9845
WWW.ARIESELEC.COM ⢠INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
10017
Rev. AA
|