24-516-10 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – Lo-PRO®file ZIF (Zero-Insertion-Force) Socket

Series 526 Lo-PRO^®file
ZIF (Zero-Insertion-Force) Socket
FEATURES
• A choice of 24, 28, or 40 pin count devices can be inserted without bending or
otherwise damaging the legs, since no force is required to either insert or remove
the component from the socket.
• A metal cam provides strong, smooth action as it moves to a positive stop, com-
pressing the double-sided contacts, ensuring a gas-tight seal.
• Test point openings provided to reach all pins.
GENERAL SPECIFICATIONS
• PLASTIC BODY: black UL 94V-0 glass-filled 4/6 Nylon
• CONTACTS: BeCu 172, spring-tempered
• CONTACT PLATING: “-10” 200µ [5.08µ] min. matte Sn per ASTM B545-
97(2004) over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290; “-10TL” 200µ
[5.08µ] min. 90/10 Sn/Pb per MIL-T-10727 over 50µ [1.27µ] min. Ni per SAE
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
AMS-QQ-N-290; “-11” 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] ^{furnished, depending on the quantity. NOTE: Aries reserves the}
min. Ni per SAE AMS-QQ-N-290 – Consult factory for availability
right to change product general specifications without notice.
• CAM: lightweight, strong, and rigid cast Zn
• OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] Sn & Sn/Pb
plating; -67°F to 257°F [-55°C to 125°C] Au plating
• CONTACT CURRENT RATING: 2 amps
ORDERING INFORMATION
XX-526-1 XXX
• CONTACT RESISTANCE: 10 mΩ max.
• BREAKDOWN VOLTAGE: 1000VAC min.
Pins
(See Table)
Plating Option
0 = Sn
• AVERAGE RETENTION FORCE (when closed): 110g/Pb, based on 0.010 [0.25] ^Series
0TL = Sn/Pb
dia. test lead
1 = Au
• SOCKET ACCEPTS: 0.008-0.014 [0.20-0.36] thick leads, 0.075-0.200 [1.91-
Solder Tail Only
5.08] long
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia.
No. of Positions
24
28
40
Dim. “A”
1.450 [36.83]
1.650 [41.90]
2.250 [57.15]
Dim. “B”
1.100 [27.94]
1.300 [33.02]
1.900 [48.26]
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
SERIES 516 STANDARD ZIF SOCKET ALSO AVAILABLE. CONSULT
DATA SHEET 10017
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
10018
Rev. AA