18108 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – Test Socket Breakout Board

Test Socket Breakout Board
FEATURES
• Fan-out from an Aries Socket/DUT on a small pitch array (=>0.4mm) to a larger pitch/
array for prototyping or programming
• Allows DUT to connect to breadboard or ZIF socket for prototyping/programming
• Adapt to existing test benches and tooling
• Can be manufactured for RoHS compliance
GENERAL SPECIFICATIONS
• BOARD MATERIAL: 0.062 [1.58] thick FR-4 or Rogers 370 HR, with 1/2-oz. Cu
traces, both sides
• PADS: finished with ENIG (Electroless Ni Immersion Au)
• TRACE WIDTHS/SPACE: 0.003 [0.076]
• OPERATING TEMPERATURE: 221°F [105°C] FR-4, 266°F [130°C] Pb-free
ORDERING INFORMATION
To obtain a quote for a specific breakout board, please email a request to [e-mail]
with the following information:
• Your name, company name, and telephone number
• A drawing or data sheet of the device to be placed on breakout board (top image)
• A drawing or data sheet of the target footprint for the breakout board (bottom image)
• A list of any other design parameters or restrictions that must be considered
• The quantity of breakout board to be quoted
FULL-ARRAY SHOWN AS AN EXAMPLE; YOUR SPECIFIC DEVICE
PATTERN/FOOTPRINT WILL BE SUPPLIED WHEN ORDERED.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
ARIESELEC.COM • [e-mail]
18108
Rev. 1.1