14033 Datasheet, PDF (1/2 Pages) Aries Electronics, Inc. – Pin Grid Array Socket/Header on 0.100 [2.54] Centers w/Solder Pin Tails

Pin Grid Array Socket/Header on
0.100 [2.54] Centers w/Solder Pin Tails
FEATURES
• Aries offers a wide number of pin grid array configurations from which to choose.
• Low-insertion-force contacts standard.
GENERAL SPECIFICATIONS
• PGM SERIES SOCKET BODY: black UL 94V-0 glass-filled 4/6 Nylon
• PGG SERIES SOCKET BODY: FR-4, 0.062 [1.57] thick
• PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00
• PIN BODY PLATING: either 200µ [5.08µ] min. Sn per ASTM B545 Type 1 or
200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 or 10µ [0.254µ] min. Au per
MIL-G-45204 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290
• 6-FINGERED COLLET CONTACT: BeCu per UNS C17200 ASTM-B194-01 (not
applicable to Post Style Pin)
• CONTACT PLATING: either 100µ [2.54µ] min. Sn per ASTM B545 Type 1 or
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
100µ [2.54µ] min. 93/7 Sn/Pb per ASTM B545 or 10µ [0.254µ] min. Au per
MIL-G-45204 or 30µ [0.762µ] min. heavy Au plating also available
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
• CONTACT CURRENT RATING: 3 amps
• OPERATING TEMPERATURE : -67°F to 221°F [-55°C to 105°C] Sn plating
ORDERING INFORMATION
: -67°F to 257°F [-55°C to 125°C] Au plating
• STANDARD CONTACT INSERTION FORCE : 67g/pin
WITHDRAWAL FORCE : 30g/pin
Consult Factory – Aries will assign a
special P/N
NORMAL FORCE : 45g/pin; based on a 0.018 [0.46] dia. test lead
• SPECIAL ULTRA-LOW INSERTION FORCE : 22g/pin
WITHDRAWAL FORCE : 11g/pin
NORMAL FORCE : 12g/pin; based on a 0.018 [0.46] dia. test lead
• ACCEPTS LEADS: 0.015-0.026 [0.38-0.66] in dia., from 0.110 [2.79] long min.
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE : SOLDER TAIL : 0.030 ±0.002 [0.76 ±0.05] dia.
: POST STYLE : 0.028 ±0.002 [0.71 ±0.05] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
BASIC DIMENSIONS :
“A SQ MAX” # PINS PER ROW x 0.100 [2.54]
“B” (# PINS PER ROW -1) x 0.100 [2.54]
ADDITIONAL CONFIGURATION OPTIONS INCLUDE A CUT-OUT
WINDOW FOR MORE EFFICIENT UTILIZATION OF BOARD SPACE AND
BETTER COOLING – AVAILABLE WITH OR WITHOUT PIN NUMBER ONE
IDENTIFICATION SHOWN BELOW.
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
14033
1 of 2
Rev. AA