14005 Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – OUT ASSEMBLY SRE SERIES CONNECTORS

Part No. 1107741 and 1108800
Oscillator Sockets
FEATURES:
• This four pin socket (in 14 & 8 position frames) accept
standard oscillator packages.
• Designed to be end-to-end or side-to-side st ackable.
• Machine insertable.
SPECIFICATIONS:
• Body material is black UL 94V-0 Glass-filled 4/6 Nylon.
• Pin body is Brass Alloy 360 1/2 hard per UNS C36000
ASTM-B16-00.
• Pin body plating is 200μ [5.08μm] min Tin per ASTM B 545
Type 1 over 100μ [2.54μm] min. Nickel per SAE-AMS-QQ-
N-290.
• 4-fingered collet contact is Beryllium Copper Alloy per
UNS C17200 ASTM-B194-01.
• Contact plating is 10μ [.25μm] min. Gold per MIL-G-45204 Note: Aries specializes in custom design and production. In addition to the
over 50μ [1.27μm] min. Nickel per SAE-AMS-QQ-N-290.
• Contact current rating=3 Amps.
• Operating temperature=221°F [105°C].
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
• Insertion Force=180 grams/pin; Withdrawal Force=90
ORDERING INFORMATION
grams/pin; Normal Force=140 grams/pin; based on a .018
[.46] diameter test lead.
• Accepts leads .015-.025 [.38-.64] in diameter, .100-.146
[2.54-3.71] in length.
MOUNTING CONSIDERATIONS:
1107741 = 14 Pin (Tin Shell/Gold Collet)
1107741-TL = 14 Pin (Tin/Lead Shell/Gold Collet)
1108800 = 8 Pin (Tin Shell/Gold Collet)
1108800-TL = 8 Pin (Tin/Lead Shell/Gold Collet)
•Suggested PCB hole size=.030 ± .002 [.76 ± .05] dia.
CONTACT DETAIL
ALL DIMENSIONS: INCHES [MILLIMETERS]
All tolerances ± .005 [.13]
unless otherwise specified
Bristol, PA USA
http://www.arieselec.com • [e-mail]
TEL: [phone]
FAX: [phone]
14005
REV. F
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED