13004 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – Series 800 Vertisocket w/Collet Contacts for Vertical Mounting

Series 800 Vertisocket^™
w/Collet Contacts for Vertical Mounting
FEATURES
• DIP Packaging of LEDs, Incandescent Lamps, DIP Switches, Test Points, etc.
• Variations of Mounting Positions provide Exceptional Design Freedom
• Accepts Standard LEDs and Incandescent Displays as well as 0.500 [21.70] and 0.600 [15.24] Tall
Displays
GENERAL SPECIFICATIONS
• BODY MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon
• SPACER: fish paper
• PIN BODY: brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05
• PIN BODY PLATING: 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn
per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290B
• 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-08
• CONTACT PLATING: 30µ [0.76µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-
QQ-N-290B
• CONTACT CURRENT RATING: 3 amps
• OPERATING TEMPERATURE: 221°F [105°C]
ORDERING INFORMATION
XX-X810-90 C XX
• INSERTION FORCE: 180g/pin, based on 0.018 [0.46] dia. test lead
• WITHDRAWAL FORCE: 90g/pin, based on 0.018 [0.46] dia. test lead
• NORMAL FORCE: 140g/pin, based on 0.018 [0.46] dia. test lead
• ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia., 0.110-0.150 [2.79-3.81] long
Optional Pin Body Plating
TL = Sn/Pb
Collet Contacts
90° Display Angle
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia.
Device Footprint, Dim. “Y”
2810 = 0.200 [5.08]
810 = 0.300 [7.62]
4810 = 0.400 [10.16]
6810 = 0.600 [15.24]
Pin Count & Spacing
(See Table)
Body Style
A
B
B
B
Centers “Y”
0.200 [5.08]
0.300 [7.62]
0.400 [10.16]
0.600 [15.24]
Dim. “Z”
0.300 [7.62]
0.400 [10.16]
0.500 [12.70]
0.700 [12.78]
Available Sizes
8, 10
8, 10, 12, 14, 16
8, 10
8, 10, 12, 14, 16
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
FOR HORIZONTAL MOUNTING, SEE DATA SHEET 13005
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
13004
Rev. 6.1
1 of 1