12034 Datasheet, PDF (1/1 Pages) Aries Electronics, Inc. – Series 0600 Strip-Line Header w/Coined Contacts

Series 0600 Strip-Line^™ Header
w/Coined Contacts
FEATURES
• Available with Fork- or Post-style Coined Contacts
• Header to be Cut to Desired Number of Positions Required
• Side-to-side and End-to-end Stackable
GENERAL SPECIFICATIONS
• BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
• COINED CONTACTS: Brass,1/2-hard
• CONTACT PLATING: 200µ min. matte Sn plating per ASTM B545-97(2004)e1 over 50µ [1.27µ] min. Ni
per QQ-N-290 –OR– 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per QQ-N-290 –OR–
200µ [5.08µ] min. Sn/Pb 90/10 per MIL-T-10727 over 50µ [1.27µ] min. Ni per QQ-N-290
• CONTACT CURRENT RATING: 2 amps
• OPERATING TEMPERATURE: 221°F [105°C] for Sn & Sn/Pb plating; 257°F [125°C] for Au plating
• ACCEPTS LEADS: up to 0.025 [0.64] dia. leads
MOUNTING CONSIDERATIONS
ORDERING INFORMATION
XX-0600-X X
Plating
0 = Sn
0TL = Sn/Pb
1 = Au
Pin Style
1 = Fork
2 = Post
• SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ± 0.05] dia.
Series
No. of Pins
1 to 25
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
FOR SCREW MACHINE CONTACTS, SEE DATA SHEET 12036
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
12034
Rev. 4.1
1 of 1