12025 Datasheet, PDF (1/2 Pages) Aries Electronics, Inc. – EJECT-A-DIP Lock/Eject DIP Socket w/Collet Contacts & Wire Wrap Pins

EJECT-A-DIP^™ Lock/Eject DIP Socket
w/Collet Contacts & Wire Wrap Pins
FEATURES
• Rugged, Solderable Socket with a Unique Ejector/Latch for Fast In-field Board Maintenance
• Latch Locks-in Connector or Device for High-vibration Environments
• Ejector/Latch removes DIP Packages without Damage
GENERAL SPECIFICATIONS
• LATCH & BODY: Black UL 94V-0 Glass-filled 4/6 Nylon
• PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05
• PIN BODY PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 –OR– 200µ [5.08µ] min. 93/7 Sn/
Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ
ORDERING INFORMATION
[2.54µ] min. Ni per SAE AMS-QQ-N-290B
• 6-FINGER COLLECT CONTACTS: BeCu per UNS C17200 ASTM B194-08
XX-CXXX-X XXX
• CONTACT PLATING: 30µ [0.76µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni
Plating
per SAE AMS-QQ-N-290B
• CONTACT CURRENT RATING: 3 amps
• INSULATION RESISTANCE: 10,000 MΩ at 500VDC
• WITHSTANDING VOLTAGE: 1000Vrms
• OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] for Sn plating; -67°F to
257°F [-55°C to 125°C] for Au plating
• INSERTION FORCE: 67g/pin, based on 0.018 [0.46] dia. test lead
• WITHDRAWAL FORCE: 30g/pin, based on 0.018 [0.46] dia. test lead
0 = Au Collet, Sn Shell
0TL = Au Collet, Sn/Pb Shell
1 = Au Collet & Shell
Termination
2 = 2-level Wire Wrap
3 = 3-level Wire Wrap
Dim. “H”
(See Table)
• NORMAL FORCE: 45g/pin, based on 0.018 [0.46] dia. test lead
No. of Pins
(See Table)
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.045 ±0.002 [1.15 ±0.05] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
FOR COLLECT SOCKETS w/SURFACE MOUNT PINS, SEE DATA SHEET 12023
FOR COLLET SOCKET w/SOLDER PIN TAILS, SEE DATA SHEET 12024
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
12025
Rev. 6.2
1 of 2