12016 Datasheet, PDF (1/2 Pages) Aries Electronics, Inc. – Series 518 Open Frame Socket w/Collet Contacts & Solder Pin Tails

Series 518 Open Frame Socket
w/Collet Contacts & Solder Pin Tails
FEATURES
• Open Frame allows Efficient Utilization of Board Space with Optimized Cooling
• Choose from Several Pin Styles
• Compatible with Automatic Insertion Equipment
• Side-to-side and End-to-end Stackable
GENERAL SPECIFICATIONS
• BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
• PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16-
00
• PIN BODY PLATING: 10μ [0.25μ] min. Au per MIL-G-45204
–OR– 200μ [5.08μ] min. 93/7 Sn/Pb per ASTM B545
–OR– 200μ [5.08μ] min. Sn per ASTM B545 Type 1 over 100μ
[2.54μ] min. Ni per SAE AMS-QQ-N-290
• 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM
B194-01
• CONTACT PLATING: 200μ [5.08μ] min. 93/7 Sn/Pb per ASTM
B545
–OR– 200μ [5.08μ] min. Sn per ASTM B545 Type 1
–OR– 10μ [0.25μ] Au per MIL-G-45204 over 50μ [1.27μ] min.
Ni per SAE AMS-QQ-N-290
• AVAILABLE PLATING: heavy Au 30μ [0.76μ]
• CONTACT CURRENT RATING: 3 amps
• OPERATING TEMPERATURE: 221°F [105°C] for Sn and Sn/Pb
plating, 257°F [125°C] for Au plating
• INSERTION FORCE: 180g/pin
• WITHDRAWAL FORCE: 90g/pin
• NORMAL FORCE: 140g/pin
• MIDGET PIN INSERTION FORCE: 370g/pin
• MIDGET PIN WITHDRAWAL FORCE: 150g/pin
• MIDGET PIN NORMAL FORCE: 240g/pin, based on a 0.018
[0.46] dia. test lead
• ACCEPTS LEAD LENGTHS: from 0.100 [2.54] min. and 0.015-
0.025 [0.38-0.64] dia.
• ACCEPTS MIDGET PIN LEAD LENGTHS: from 0.080 [2.03] and
up to 0.022 [0.56] dia.
ORDERING INFORMATION
XX-X 518-X XXX XXX
Additional Options
H = Heavy Au on Collet
T = Sn on Collet
TL = Sn/Pb on Collet
M = Midget Solder Tail
(Au Collet, Sn Shell Only)
MTL = Midget Solder Tail
(Au Collet, Sn/Pb Shell Only)
E = Extra Long Solder Tail
Plating *
0 = Au Collet, Sn Shell
OE = Au Collet, Sn Shell w/Extra Long Solder Tail
OTL = Au Collet, Sn/Pb Shell
1 = Au Collet & Shell
Termination
1 = Solder Pin Tail
Series
Row-to-Row Spacing, “Y” Dim.
3 = 0.300 [7.62]
4 = 0.400 [10.16]
6 = 0.600 [15.24]
9 = 0.900 [22.86]
No. of Pins
(See Table)
* Consult Factory for Additional Plating Options
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE FOR SOLDER PIN TAIL AND EXTRA LONG PIN: 0.030 ±0.002 [0.76 ±0.05] dia.
• SUGGESTED PCB HOLE SIZE FOR MIDGET PIN: 0.040 ±0.002 [1.02 ±0.05] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
OPEN FRAME COLLET SOCKET w/SOLDER PIN TAILS, SEE DATA SHEET 12017
OPEN FRAME SURFACE MOUNT SOCKET, SEE DATA SHEET 12018
OPEN FRAME COLLET CAPACITOR SOCKET w/SOLDER PIN, SEE DATA SHEET 12026
OPEN FRAME COLLET CAPACITOR SOCKET w/WIRE WRAP, SEE DATA SHEET 12027
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
12016
Rev. 1.2
1 of 2