10010 Datasheet, PDF (1/2 Pages) Aries Electronics, Inc. – Universal PLCC ZIF Test Socket

Series 537 ‘Live Bug’ Type
Universal PLCC ZIF Test Socket
FEATURES
• Socket takes 7 Sizes of PLCC Footprints with Insert Plate, P/N XX-537-20
• PLCC is inserted ‘Live Bug’ (pins down) into position over Bed; Top half of Clamshell is Closed
for Testing, Programming, etc. Bottom Solder Pin Tails are the Ends of the Contacts or ‘Bed,’
thus Permits Mounting to PC Board
• Accepts JEDEC MO-047AA-AH PLCCs and JEDEC MO-044AA-AB Ceramics with 20, 28, 44,
52, 68, or 84 Square Leads, as well as JEDEC MS-016 PLCCs with 32 Rectangular Leads
GENERAL SPECIFICATIONS
• PLASTIC: black UL 94V-0 glass-filled Polyphenylene Sulfide (PPS)
• CONTACT PIN: BeCu 172 heat-treated
• CONTACT PLATING: 12μ [0.31μ] min. Au per MIL-G-45204 over 100μ [2.54μ] min. Ni per SAE
AMS-QQ-N-290 over 20μ [0.51μ] Cu per MIL-C-14550
• HARDWARE: Stainless Steel
• OPERATING TEMPERATURE: 85°F to 257°F [-65°C to 125°C]
• LIFE CYCLE: 10,000 insertions, maximum
ORDERING INFORMATION
84-537-21 – Socket Only, No Insert Plates
84-537-21-7 – Socket and 7 Insert Plates
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.032 ±0.002 [0.81 ±0.05] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
FOR ADDITIONAL INSERT PLATES, SEE DATA SHEET 10012
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
10010
Rev. 1.2
1 of 2