10004HT Datasheet, PDF (1/2 Pages) Aries Electronics, Inc. – High-Temp PGA ZIF Test & Burn-in Socket for Footprints on Std 8x8 to 21x21 Grid

High-Temp PGA ZIF Test & Burn-in Socket for
Footprints on Std 8x8 to 21x21 Grid
FEATURES
• Strong Metal Cam Activates Normally-closed Contacts, Preventing Dependency on Plastic
for Contact Force
• Handle mounted on Right- or Left-hand Side
• Any Footprint Accepted on Standard 8x8 to 21x21 Grid
GENERAL SPECIFICATIONS
• SOCKET BODY: black UL 94V-0 Polyphenylene Sulfide (PPS)
• CONTACTS: Spinodal
• CONTACT PLATING: 50μ [1.27μ] min. NiB
• HANDLE: Stainless Steel
• CONTACT CURRENT RATING: 1 amp
• OPERATING TEMPERATURES: -85°F to 392°F [-65°C to 200°C]
• ACCEPTS LEADS: 0.014-0.026 [0.36-0.66] dia., 0.120-0.290 [3.05-7.37] long
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.032 ±0.002 [0.81 ±0.05] dia.
• See PCB FOOTPRINT below
• Plugs into standard PGA sockets
Grid Size
8x8*
9x9
12 x 12 *
13 x 13
14 x 14 *
15 x 15
16 x 16 *
17 x 17
18 x 18 *
19 x 19
20 x 20 *
21 x 21
No. of Pins
64
81
144
169
196
225
256
289
324
361
400
441
Dim. “C”
0.700 [17.78]
0.800 [20.32]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
Dim. “A”
1.695 [43.05]
1.894 [48.10]
2.094 [53.20]
2.294 [58.27]
2.494 [63.35]
2.694 [68.43]
Dim. “B”
1.110 [28.19]
1.510 [38.35]
1.710 [43.43]
1.910 [48.51]
2.110 [53.59]
2.310 [58.67]
Dim. “D”
1.275 [32.39]
1.675 [42.55]
1.875 [47.63]
2.075 [52.71]
2.275 [57.79]
2.475 [62.87]
ORDERING INFORMATION
XXX-PXX XXXXX-1 X
Plating
6 = NiB
Consult Factory for
Minimum Order Availability
Solder Pin Tail
Grid Size & Footprint Number
Series Designator
PRS = Handle Right – Std
PLS = Handle Left
Number of Pins
* Top- and Right-hand Side Rows left out
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
SPECIAL HANDLE REQUIREMENTS: CONSULT FACTORY
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL [phone] • FAX [phone]
WWW.ARIESELEC.COM • [e-mail]
10004HT
Rev. 1.1
1 of 2