SH05_16 Datasheet, PDF (2/3 Pages) Arch Electronics Corp. – Power Module for PCB Mountable

SH05 SERIES
VER : B_0 update : 2012.01.20
Encapsulated DC-DC Converter
5 Watts
Model No. ( Dual Output )
Max Output Wattage (W)
Input Voltage (V.DC.)
Output Voltage (V.DC.)
Efficiency (typ.)
Capacitor Load (max)
Model No. ( Dual Output )
Max Output Wattage (W)
Input Voltage (V.DC.)
Output Voltage (V.DC.)
Efficiency (typ.)
Capacitor Load (max)
SH05-24F-5D
5W
24V (9-36V)
±5V / ±500mA
81%
±14700 uF
SH05-48F-5D
5W
48V (18-75V)
±5V / ±500mA
81%
±36000 uF
SH05-24F-12D
6W
24V (9-36V)
±12 / ±250mA
83%
±700 uF
SH05-48F-12D
6W
48V (18-75V)
±12 / ±250mA
84%
±820 uF
SH05-24F-15D
6W
24V (9-36V)
±15 / ±200mA
83%
±100 uF
SH05-48F-15D
6W
48V (18-75V)
±15 / ±200mA
83%
±240 uF
Model No.
( Dual Output )
Max Output Wattage (W)
Input
Input Filter
Voltage (V.DC.)
Voltage Accuracy
Output
Current (mA) max
Line Regulation (LL-HL) (typ.)
Load Regulation (10-100%) (typ.)
Protection
Minimum Load
Ripple
Noise
Switching Frequency
Over Power Protection
Short Circuit Protection
Voltage
Isolation
Resistance
Environment
Physical
Capacitance
Operating Temperature
Storage Temperature
Case Temperature
Temperature Coefficient
Humidity
MTBF
Dimension (L x W x H)
Case Material
Weight
Cooling Method
SH05-24F-5D
SH05-24F-12D
SH05-24F-15D
SH05-48F-5D
SH05-48F-12D
SH05-48F-15D
5W
6W
6W
π type
±5
±12
±2%
±500
±250
±0.5%
±1%
±1%
0%
<0.2% Vout +40mV max (Vp-p)
<0.5% Vout +50mV max (Vp-p)
300KHz
Works over 120% of rating and recovers automatically.
Current limit, auto-recovery
1600 VDC.
108 ohms
1000 pF
-25°C…+60°C (at Full Load)
-55°C…+105°C
+100°C max.
±0.02% Per°C
95% RH
>800,000 h @ 25°C (MIL-HDBK-217F)
1.25 x 0.8 x 0.44 Inches ( 31.8 x 20.3 x 11.2 mm ) Tolerance ±0.5 mm
Nickel-Coated Copper with Non-Conductive Base, Six-side shielded.
20 g
Free-air convection
±15
±200
±1%
1.All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
OUTPUT NOISE
The output noise is measured with 0.1μF tantalum capacitor
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-2-