MTC30 Datasheet, PDF (2/4 Pages) Arch Electronics Corp. – Switching Power Module for PCB Mountable

MTC30 SERIES
VER : A_1 update : 2015.03.09
AC-DC Power Module
30 Watts
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No. ( Single Output )
Safety
Approval
Conducted and radiated EMI
MTC30-5S
MTC30-12S
MTC30-15S
MTC30-24S
cUL/UL 60950-1,
ANSI/AAMI ES 60601-1: 2005, 1st Edition and CAN/CSA-C22.2 No. 60601-1:08, 2nd
Edition, 2XMOPP (Pending)
EN55011 (Pending)
ESD
EN61000-4-2 air ± 8kV , Contact ± 4kV (Pending)
Radiated Immunity
EN61000-4-3 10V/m (Pending)
Fast Transient
EN61000-4-4 ± 2kV (Pending)
EMC
Surge
EN61000-4-5 ±1kV (Pending)
Conducted Immunity
EN61000-4-6 10Vrms (Pending)
PFMF
EN61000-4-8 30A/m (Pending)
Dips
EN61000-4-11 30% 10ms (Pending)
Interruption
EN61000-4-11 >95% 5000ms (Pending)
NOTE
1. This product is not designed for use in critical life support systems, equipment used in hazardous environment,
nuclear control systems or other such applications which necessitate specific safety and regulatory standards
other the ones listed in this datasheet.
2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
3. Safety approvals cover frequency 47-63 Hz.
4. That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
5. It's recommended to add Varistor 14S471K at L / N input side in parallel.
6. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw
MECHANICAL DIMENSION ( Top View )
PIN#
1
2
3
4
5
Single
AC IN (N)
AC IN (L)
-DC OUT
NO PIN
+DC OUT
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-2-