AQFV480F_SERIES Datasheet, PDF (2/7 Pages) Arch Electronics Corp. – Enclosed Switching Power Supply

AQFV480F SERIES (CV Mode)
VER : A_0 update : 2010.09.06
AC-DC Switching Power Supply
480 Watts
ELECTRICAL SPECIFICATIONS
Model No.
Function
Environment
Physical
Safety
EMC
5V Stand by
DC OK Signal
Remote Control
FAN Control
Operating Temperature
Storage Temperature
Temperature Coefficient
Humidity
MTBF
Vibration
Dimension (L x W x H)
Weight
Agency Approvals
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
AQFV480F-12S
AQFV480F-24S
AQFV480F-36S
AQFV480F-48S
5VSB: 5V@0.6A ; Tolerance ±10% , Ripple & Noise: 100m Vp-p (max.)
Turn ON: 4~6V ; Turn OFF: 0~1V
+RC / -RC: Power ON=open ; Power OFF=short
12VDC / 0.5A max.
-20°C…+70°C (with derating)
-25°C…+85°C
±0.03%/°C ( 0~50°C )
95% RH
>100,000 h @ 25°C (MIL-HDBK-217F)
10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes.
7.98 x 4.2 x 1.78 Inches (202.8 x 106.5 x 45.0 mm ) Tolerance ±0.5 mm
1050 g
CE, UL60950 (Pending)
EN 55022 class B (Pending)
EN 55024 (Pending)
1. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
BLOCK DIAGRAM
DERATING