AQFV480E_16 Datasheet, PDF (2/7 Pages) Arch Electronics Corp. – AC-DC Switching Power Supply

AQFV480E SERIES (CV Mode)
VER : B_4 update : 2015.11.17
AC-DC Switching Power Supply
480 Watts
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No.
Function
5V Stand by
DC OK Signal
Remote Control
FAN Control
AQFV480E-12S
AQFV480E-24S
AQFV480E-36S
AQFV480E-48S
5VSB: 5V@0.6A ; Tolerance 10% , Ripple & Noise: 100m Vp-p (max.)
Turn ON: 4~6V ; Turn OFF: 0~1V
+RC / -RC: Power ON=open ; Power OFF=short
12VDC / 0.5A max.
Operating Temperature
Storage Temperature
-20°C…+70°C (with derating)
-25°C…+85°C
Environment
Temperature Coefficient
Humidity
±0.03%/°C ( 0~50°C )
95% RH
MTBF
>100,000 h @ 25°C (MIL-HDBK-217F)
Vibration
10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes.
Physical
Dimension (L x W x H)
Weight
7.0 x 4.2 x 2.37 Inches (177.8 x 106.5 x 60.3 mm ) Tolerance 0.5 mm
950 g
Safety
Agency Approvals
UL60950-1, CE(Surge:4KV)
EMC
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
EN 55022 class B
EN 55024
NOTE
1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
2. Strongly recommend to conduct this test with DC Voltage. If customer wishes to test with AC Voltage,
please disconnect all Y-Capacitors within Arch power supply.
BLOCK DIAGRAM
DERATING
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-2-