AQF500 Datasheet, PDF (2/6 Pages) Arch Electronics Corp. – Open Frame Switching Power Supply

AQF500 SERIES
VER : A_2 update : 2015.08.11
AC-DC Switching Power Supply
500 Watts
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No.
Dimension (L x W x H)
AQF500-12S
AQF500-24S
AQF500-48S
5.0 x 3.0 x 1.28 Inches ( 127.0 x 76.2 x 32.5 mm ) Tolerance 0.5 mm
Physical
Weight
460 g
Cooling Method
Free convection / 30 CFM FAN
Safety
Agency Approvals
CE, UL60950-1, CB
EMI (Conducted & Radiated Emission)
EN 55022 class B, Radiated Class A
EMC
EMS (Noise Immunity)
EN 55024
Surge
1KV L-N, 2KV L N-FG
NOTE
1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
2. It's recommended to add Varistor 14S471K at L / N input side in parallel.
3. Hold-up Time measured at 90% Vout.
4. Main Vout >3% Load, 12V (Aux) / 0.3A.
5. Strongly recommend to conduct this test with DC Voltage. If customer wishes to test with AC Voltage,
please disconnect all Y-Capacitors within Arch power supply.
BLOCK DIAGRAM
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-2-