ST60_16 Datasheet, PDF (1/2 Pages) Arch Electronics Corp. – Power Module for PCB Mountable

ST60 SERIES
VER : A_0 update : 2015.10.02
Encapsulated DC-DC Converter
60 Watts
KEY FEATURES
 Power Module for PCB Mountable
 Smaller Size
 4:1 Wide Input Range
 Regulated Output
 High Efficiency
 Operating Temperature: -40°C…+80°C (with derating)
 Remote ON/OFF Control
 Protections: Over Voltage / Over Temperature /
Short Circuit All by Auto-recovery
 3-Year Product Warranty
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No. with Heatsink
( Single Output ) ST60-48F-12S X
ST60-48F-15S X
ST60-48F-24S X
Model No. without Heatsink
(Single Output ) ST60-48F-12S
ST60-48F-15S
ST60-48F-24S
Max Output Wattage (W) with Heatsink
(at 48 Vin) 60W
Max Output Wattage (W) without Heatsink
(at 48 Vin) 60W
55.5W
56.4W
Input
Voltage (with Derating)
48V (18-72V)
DC-DC ON
Remote ON/OFF
DC-DC OFF
Open
When -DC IN and ON/OFF CTL is Short
Voltage (V.DC.)
12
15
24
Trim Voltage Range
Voltage Accuracy
Current (mA) with Heatsink
(max.)
5%
2%
5000
5%
4000
None
2500
Output
Current (mA) without Heatsink (max.)
Line Regulation (LL-HL) (typ.)
5000
0.5%
3700
2350
Load Regulation (10-100%) (typ.)
1%
Capacitor Load (max)
(at 48 Vin) 800uF
500uF
220uF
Ripple & Noise
(Note 1) 150mV
1% of Vout
1% of Vout
Efficiency
(at 48 Vin) 91%
90%
90%
Over Power Protection
Auto-recovery
Protection
Over Voltage Protection
Over Temperature
Zener diode clamp
Auto-recovery
Short Circuit Protection
Auto-recovery
Isolation
Voltage
Resistance
Capacitance (typ.)
1600 VDC.
108 ohms
2420 pF
Operating Temperature
(Note 2) -40°C…+80°C (with derating)
Storage Temperature
-45°C…+100°C
Environment
Case Temperature
Temperature Coefficient
+100°C max.
±0.05%/°C
Humidity
95% RH
MTBF
>550,000 h @ 25°C (MIL-HDBK-217F)
Physical
Dimension (L x W x H)
Case Material
Weight
2.08 x 1.08 x 0.53 Inches ( 52.8 x 27.5 x 13.5 mm ) Tolerance 0.5 mm
Six-side shielded Aluminum with Non-Conductive base, Black Anodize
Pending
Cooling Method
Free-air convection
Safety
EMC
Agency Approvals
EMI
(Note 3)
(Conducted & Radiated Emission)
EMS (Noise Immunity)
CE, UL, cUL (Pending)
EN 55022 class A (Pending)
EN 55024 (Pending)
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-1-