ST60 Datasheet, PDF (1/2 Pages) Arch Electronics Corp. – Power Module for PCB Mountable

ST60 SERIES
KEY FEATURES
 Power Module for PCB Mountable
 Smaller Size
 4:1 Wide Input Range
 Regulated Output
 High Efficiency
 Operating Temperature: -40°C…+85°C (with derating)
 Remote ON/OFF Control
 3-Year Product Warranty
VER : PA_2 update : 2015.08.18
Encapsulated DC-DC Converter
60 Watts
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No. ( Single Output )
ST60-48F-12S
ST60-48F-15S
ST60-48F-24S
Max Output Wattage (W)
60W
Input
Voltage (with Derating)
48V (18-72V)
Voltage (V.DC.)
12
15
24
Output
Trim Voltage Range
Voltage Accuracy
Current (mA) max
Line Regulation (LL-HL) (typ.)
Load Regulation (10-100%) (typ.)
Capacitor Load (max) (at 48 Vin)
10%
2%
5000
0.5%
1%
1000uF
4000
680uF
2500
150uF
Protection
Ripple & Noise
Efficiency
Switching Frequency
Over Power Protection
Over Voltage Protection
(Note 1)
1% of Vout
91%
200KHz
Auto-recovery
Zener diode clamp
90%
90%
Short Circuit Protection
Auto-recovery
Isolation
Voltage
Resistance
Capacitance
Operating Temperature
Storage Temperature
1600 VDC.
108 ohms
2200 pF
-40°C…+85°C (with derating)
-50°C…+105°C
Environment
Case Temperature
Temperature Coefficient
+105°C max.
±0.05%/°C
Physical
Humidity
MTBF
Dimension (L x W x H)
Case Material
Weight
95% RH
>550,000 h @ 25°C (MIL-HDBK-217F)
2.08 x 1.08 x 0.55 Inches ( 52.8 x 27.4 x 14.0 mm ) Tolerance 0.5 mm
Six-side shielded Aluminum with Non-Conductive base, Black Anodize
Pending
Safety
EMC
Cooling Method
Agency Approvals
EMI
(Note 3)
(Conducted & Radiated Emission)
EMS (Noise Immunity)
Free-air convection
CE, UL, cUL (Pending)
EN 55022 class A (Pending)
EN 55024 (Pending)
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-1-