SH10_16 Datasheet, PDF (1/3 Pages) Arch Electronics Corp. – Power Module for PCB Mountable

SH10 SERIES
VER : B_0 update : 2012.01.20
Encapsulated DC-DC Converter
10 Watts
KEY FEATURES
„ Power Module for PCB Mountable
„ High Efficiency and Reliability
„ 2:1 Input Range
„ Single and Dual Output
„ Regulated Output
„ Low Ripple and Noise
„ 3-Years Product Warranty
ELECTRICAL SPECIFICATIONS
Model No. ( Single Output )
Input Voltage (V.DC.)
Output Voltage (V.DC.)
Efficiency (typ.)
Capacitor Load (max)
SH10-12-3.3S
12V (9-18V)
3.3V/2500mA
82%
2200μF
Model No. ( Single Output )
Input Voltage (V.DC.)
Output Voltage (V.DC.)
Efficiency (typ.)
Capacitor Load (max)
SH10-24-3.3S
24V (18-36V)
3.3V/2500mA
82%
2200μF
Model No. ( Single Output )
Input Voltage (V.DC.)
Output Voltage (V.DC.)
Efficiency (typ.)
Capacitor Load (max)
SH10-48-3.3S
48V (36-75V)
3.3V/2500mA
82%
2200μF
SH10-12-5S
12V (9-18V)
5V/2000mA
83%
2200μF
SH10-24-5S
24V (18-36V)
5V/2000mA
85%
2200μF
SH10-48-5S
48V (36-75V)
5V/2000mA
85%
2200μF
SH10-12-12S
12V (9-18V)
12V/830mA
86%
560μF
SH10-24-12S
24V (18-36V)
12V/830mA
86%
560μF
SH10-48-12S
48V (36-75V)
12V/830mA
86%
560μF
SH10-12-15S
12V (9-18V)
15V/670mA
86%
470μF
SH10-24-15S
24V (18-36V)
15V/670mA
86%
470μF
SH10-48-15S
48V (36-75V)
15V/670mA
86%
470μF
SH10-12-24S
12V (9-18V)
24V/416mA
86%
100μF
SH10-24-24S
24V (18-36V)
24V/416mA
86%
100μF
SH10-48-24S
48V (36-75V)
24V/416mA
86%
100μF
Model No.
( Single Output )
Max Output Wattage (W)
Input
Input Filter
Voltage (V.DC.)
Voltage Accuracy
Current (mA) max
Line Regulation (LL-HL) (typ.)
Output
Load Regulation (10-100%) (typ.)
Minimum Load
Ripple
Noise
Switching Frequency
Protection
Over Power Protection
Short Circuit Protection
Voltage
Isolation
Resistance
Capacitance
Operating Temperature
Storage Temperature
Environment
Case Temperature
Temperature Coefficient
Humidity
MTBF
Dimension (L x W x H)
Physical
Case Material
Weight
Cooling Method
SH10-12-3.3S
SH10-12-5S
SH10-12-12S
SH10-12-15S
SH10-24-3.3S
SH10-24-5S
SH10-24-12S
SH10-24-15S
SH10-48-3.3S
SH10-48-5S
SH10-48-12S
SH10-48-15S
10W
π type
3.3
5
12
±2%
2500
2000
830
±0.5%
±3%
±1%
±1%
0%
50 mV max.
1% max.
50 mV max.
1% max.
300KHz
Above 105% Rated Output Power
Current limit, auto-recovery
1600 VDC.
10⁸ ohms
1000 pF
-25°C…+60°C (at Full Load)
-55°C…+105°C
+100°C max.
±0.02% Per°C
95% RH
>800,000 h @ 25°C (MIL-HDBK-217F)
1.25 x 0.8 x 0.44 Inches ( 31.8 x 20.3 x 11.2 mm ) Tolerance ±0.5 mm
Nickel-Coated Copper with Non-Conductive Base, Six-side shielded.
20 g
Free-air convection
15
670
±1%
SH10-12-24S
SH10-24-24S
SH10-48-24S
24
416
±1%
1.All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor.
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-1-