English
Language : 

PLF30_SERIES Datasheet, PDF (1/2 Pages) Arch Electronics Corp. – Fully Isolated Plastic Case with IP67 Level
PLF30 SERIES
KEY FEATURES
„ Fully Isolated Plastic Case with IP67 Level
„ Constant Current
„ With Constant Current & Constant Voltage (C.C+C.V mode)
„ Universal Input: 100-240 VAC
„ With P.F.C. Function, PF>0.9
„ Free Air Convection
„ Protections: Over Load / Over Voltage / Short Circuit
„ High Reliability & Double Layered PCB
„ Ultra Compact Size: 4.92 x 2.36 x 1.38 Inches
„ 2-Years Product Warranty
VER : A_1 update : 2010.12.29
LED Power
30 Watts
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No.
Max output wattage ( W )
Voltage
(Note2)
Frequency (Hz)
Input
Power factor
Current (Full load)
Inrush current
Leakage Current
Voltage (V.DC.)
Constant Current Operation Voltage (max) (CC Mode) (Note3)
Voltage Tolerance
Current (mA) (CC Mode) (at 230VAC.)
Output
Minimum Load (mA)
Line Regulation (115-230VAC) (typ.)
Load Regulation (typ.)
Ripple & Noise (max)
Efficiency (at 230VAC.)(typ)
Over current protection
Protection
Over voltage protection
Short circuit protection
Input-Output (V.AC)
Isolation
Input-FG (V.AC)
Output-FG .(V.AC)
Operating temperature
Storage temperature
Environment Temperature coefficient
Humidity
MTBF
Dimension (L x W x H)
Physical
Weight
Cooling method
Safety
Agency Approvals
EMI (Conducted & Radiated Emission)
EMC
EMS (Noise Immunity)
Harmonic Current
PLF30-13.5S
PLF30-24S
PLF30-48S
28.4W
33.6W
33.6W
90-264 VAC
50 / 60 Hz
PF>0.9 at Full load (115 VAC / 230 VAC)
0.8A max. (115 VAC) / 0.4A max. (230 VAC)
40 A max. (Cold Start at 230 VAC)
< 0.7 mA max at 240 VAC / 63 Hz
13.5V
24V
48V
11~13.5VDC
17~ 24VDC
33.5~ 48VDC
±10%
2100
1400
700
1900
1050
525
±4%
±5%
2.4Vp-p
2.4Vp-p
4.8Vp-p
85%
88%
89%
Auto recovery
Zener diode clamp
Auto recovery
4000V
1880V
500V
-30°C…+70°C (with derating)
-40°C…+85°C
0.02%/°C
95% RH
>583,000 h @ 25°C (MIL-HDBK-217F)
4.92 x 2.36 x 1.38 Inches (125.0 x 60.0 x 35.0 mm) Tolerance ±0.5 mm
300 g
Free air convection
Design refer toUL8750,EN61347-2-13 (Pending)
Design refer to EN 55015 (Pending)
Design refer to EN 61547 (Pending)
Design refer to EN 61000-3-2(at Full Load)、EN 61000-3-3 (Pending)