ATC_SERIES Datasheet, PDF (1/5 Pages) Arch Electronics Corp. – Fully Encapsulated Plastic Case

ATC SERIES
KEY FEATURES
„ Switching Power Module for PCB Mountable
„ Fully Encapsulated Plastic Case
„ Universal Input Range 90-264VAC, 47-440 Hz
„ Regulated Output
„ Low Ripple and Noise
„ Screw Terminal For Optional
„ CE, UL, TUV Approval
„ 2-Years Product Warranty
VER : B_5 update : 2010.07.09
AC-DC Power Module
10 Watts
ELECTRICAL SPECIFICATIONS
Model No. ( Single Output )
Max Output Wattage (W)
Voltage
Frequency (Hz)
Input
Current (Full load)
Inrush Current (<2ms)
Leakage Current
External Fuse (recommend)
Voltage (V.DC.)
Voltage Accuracy
Current (mA) max
Line Regulation (LL-HL) (typ.)
Load Regulation (5-100%) (typ.)
Output
Minimum Load
Maximum Capacitive Load
Ripple
Noise
Efficiency
Hold-up Time
Switching Frequency
Over Power Protection
Protection
Over Voltage Protection
Short Circuit Protection
Input-Output (V.AC)
Isolation
Input-FG (V.AC)
Output-FG (V.AC)
Operating Temperature
Storage Temperature
Environment Temperature Coefficient
Humidity
MTBF
Dimension (L x W x H)
Physical
Case Material
Weight
Cooling Method
Safety
Agency Approvals
EMC
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
ATC-3.3S
ATC-5S
ATC-12S
ATC-15S
10W
10W
10W
10W
90-264 VAC or 120-370 VDC
47-440 Hz
200 mA max. (115 VAC) / 130 mA max. (230 VAC)
10 A max. (115 VAC) / 20 A max. (230 VAC)
0.75 mA max.
1.5 A slow blow type
3.3V
5V
12V
15V
±2%
3000
2000
833
666
±0.3%.
±0.5%
4%
5%
5%
3%
70000 uF
35000 uF
11000 uF
7000 uF
<0.2% Vout +40mV max (Vp-p)
<0.5% Vout +50mV max (Vp-p)
65%
71%
76%
75%
15 ms min.
100 kHz
Hiccup technique, auto-recovery
Zener diode clamp
Hiccup mode, indefinite (automatic recovery)
3000V
1500V
500V
-25°C…+70°C (with derating)
-40°C…+85°C
±0.02%/°C
95% RH
>250,000 h @ 25°C (MIL-HDBK-217F)
2.52 x 1.77 x 0.85 Inches ( 64.0 x 45.0 x 21.5 mm ) Tolerance ±0.5 mm
Plastic resin with Fiberglass (flammability to UL 94V-0)
100 g
Free air convection
UL/cUL, CE, TUV
EN 55022 class B
EN 50082-1
ATC-24S
10W
24V
426
5%
2300 uF
76%
1.All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor.