AQF600 Datasheet, PDF (1/4 Pages) Arch Electronics Corp. – AC-DC Switching Power Supply

AQF600 SERIES
KEY FEATURES
„ Universal Input: 90-264 VAC
„ With P.F.C. Function, PF>0.95
„ Remote Sense Function
„ Remote ON/OFF Function
„ Current Share Function
„ Power Good Function
„ Protections: Over Load / Over Voltage / Over Temperature /
Short Circuit All by Auto-recovery
„ High Power Density
„ RoHS Compliant Design
„ 3-Years Product Warranty
VER : PA_1 update : 2012.03.09
AC-DC Switching Power Supply
600 Watts
ELECTRICAL SPECIFICATIONS
Model No.
AQF600-12S AQF600-24S AQF600-28S AQF600-36S AQF600-48S
Max Output Wattage (Convection) (W)
480W
600W
600W
600W
600W
Voltage
90-264 VAC or 120-370 VDC
Frequency (Hz)
47-63 Hz
Input
Current (Full load)
Inrush Current (<2ms)
< 0.8 A max. (115 VAC) / < 4.0 A max. (230 VAC)
< 30 A max. (115 VAC) / < 60 A max. (230 VAC)
Leakage Current
< 3.5 mA max.(240VAC 63Hz)
Power Factor
PF>0.98 (115 VAC) / PF>0.93 (230 VAC) at Full Load
Voltage (V.DC.)
12V
24V
28V
36V
48V
Trim
±5%
Voltage Accuracy
±2%
Current (Convection) (A) max
40
25
21.4
16.6
12.5
Line Regulation (LL-HL) (typ.)
±1%
Output
Load Regulation (5-100%) (typ.) ±1%
Minimum Load
5%
Maximum Capacitive Load
70,000 uF 60,000 uF 48,000 uF 30,000 uF 20,000 uF
Ripple & Noise (max.)
< 1%
Efficiency (typ.)
90%
91%
92%
92%
93%
Hold-up Time
12 ms min.
Switching Frequency
100 kHz
Over Power Protection
Auto recovery
Protection
Over Voltage Protection
Over Temperature
Auto recovery
Auto recovery
Short Circuit Protection
Auto-recovery
Input-Output (V.AC)
3000V
Isolation
Input-FG (V.AC)
1500V
Output-FG .(V.AC)
500V
5V Stand by (18CFM FAN)
5VSB: 5V@0.6A ; Tolerance ±10% , Ripple & Noise: 100m Vp-p (max.)
Function
DC OK Signal
Remote Control
Turn ON: 4~6V ; Turn OFF: 0~1V
+RC / -RC: Power ON=open ; Power OFF=short
FAN Control
12VDC / 0.5A max.
Operating Temperature
-25°C…+70°C (with derating)
Storage Temperature
-25°C…+85°C
Environment
Temperature Coefficient
Humidity
±0.03%/°C ( 0~50°C )
95% RH
MTBF
>120,000 h @ 25°C (MIL-HDBK-217F)
Vibration
10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes.
AQF600-54S
600W
54V
11.1
10,000 uF
93%
1. All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-1-