AQF100C Datasheet, PDF (1/5 Pages) Arch Electronics Corp. – AC-DC Switching Power Supply

AQF100C SERIES
VER : A_2 update : 2012.05.14
AC-DC Switching Power Supply
100 Watts
KEY FEATURES
„ Open Frame 100W Power Supply in 4.0” x 2.0” Size
„ High Efficiency up to 93% Typical
„ Active PFC Function, >0.95 (230Vac), >0.99 (115Vac)
„ Universal Input: 90-264 VAC
„ 100W Full Load at 50°C Under Free Air Convection
„ Continuous Short Circuit Protection with Hiccup Mode
and Auto Recover
„ Low Leakage Current, <250uA
„ EN55022 Class B Meets (pending)
„ Class I and Class II Construction
„ 3-Years Product Warranty
ELECTRICAL SPECIFICATIONS
Standard A Type
(Pending)
Model No.
Max Output Wattage (W)
Voltage
Frequency (Hz)
Input
Current (Full load)
Inrush Current (<2ms)
Leakage Current
Power Factor
Voltage (V.DC.)
Constant Current Range (.VDC)
Voltage Adj Range (V.DC.)
Voltage Accuracy
Current Adj. Range (A) max
Line Regulation
Output
Load Regulation
Minimum Load
Maximum Capacitive Load
Ripple & Noise max.
Efficiency (typ.)
Hold-up Time
Switching Frequency
Over Power Protection
Protection
Over Voltage Protection
Short Circuit Protection
Input-Output (V.AC)
Isolation
Input-FG (V.AC)
Output-FG .(V.AC)
Operating Temperature
Storage Temperature
Environment
Temperature Coefficient
Humidity
MTBF
Vibration
Dimension (L x W x H)
Physical
Weight
Cooling Method
Safety
Agency Approvals
EMC
EMI
(Conducted & Radiated Emission)
EMS (Noise Immunity)
AQF100C-12S
AQF100C-15S
AQF100C-24S
AQF100C-48S
100 W
90-264 VAC or 120-370 VDC
47-63 Hz
<2.0 A max. (115 VAC) / <1.0 A max. (230 VAC)
< 30 A max. (115 VAC) / < 60 A max. (230 VAC)
< 0.5 mA max.
PF>0.99 (115 VAC) / PF>0.95 (230 VAC) at Full Load
12V
15V
24V
48V
8 ~ 12V
7.5 ~ 15V
12 ~ 24V
24 ~ 48V
±5% Output Voltage
±2%
4.2 ~ 8.4
3.35 ~ 6.7
2.1 ~ 4.2
1.05 ~ 2.1
±1%
±1%
3%
70,000µF
50,000µF
6,000µF
1,000µF
120mV
150mV
200mV
240mV
89%
89%
92%
93%
10 ms (110 VAC) min.
100~133 kHz
Auto recovery, Hiccup mode
Zener diode clamp
Auto recovery, Hiccup mode
3000V
1500V
500V
-25°C…+70°C (with derating)
-25°C…+85°C
±0.03%/°C ( 0~50°C )
95% RH
>250,000 h @ 25°C (MIL-HDBK-217F, Notice 1)
10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes.
4.1 x 2.05 x 0.98 Inches ( 103.9 x 52.1 x 25.0 mm ) Tolerance ±0.5 mm
200 g
Free convection
CE, UL60950-1 (Pending)
EN61000-6-3、EN 55022 class B (Conductive plane to be connected to safety earth) (Pending)
EN 55024、EN61000-4-2,3,4,5,6,8,11 (Pending)
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
1.All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor.
3.Hold-up Time measured at 90% Vout.
-1-