APF80 Datasheet, PDF (1/5 Pages) Arch Electronics Corp. – LED Power

APF80 SERIES
KEY FEATURES
„ Fully Isolated Plastic Case with IP67 Level
„ Universal Input: 90-305 VAC or 120-430 VDC
„ Three in one dimming function
(1~10VDC & PWM Signal or resistance)
„ Bulit-in Active PFC Function
„ Free Air Convection
„ High Reliability
„ With Constant Current & Constant Voltage
„ Output Voltage and Constant Current Level can Be
Adjusted Through Internal Potential Meter
„ Isolation Class II
„ LED Power Application
„ 3-Years Product Warranty
VER : PA_2 update : 2012.05.10
LED Power
80 Watts
ELECTRICAL SPECIFICATIONS
Model No.
Max Output Wattage (W)
Voltage
Frequency (Hz)
Input
Current (Full load)
Inrush Current (<2ms)
Leakage Current
Power Factor
Voltage (V.DC.)
Constant Current Range (V.DC.)
Voltage Accuracy
Current (Convection) (mA) max
Current ADJ Range (mA)
Line Regulation
Output
Load Regulation
Minimum Load
Maximum Capacitive Load
Ripple & Noise (max.)
Efficiency (typ.)
Hold-up Time
Switching Frequency
Over Power Protection
Protection
Over Voltage Protection
Overt Temperature Protection
Short Circuit Protection
Input-Output (V.AC)
Isolation
Input-FG (V.AC)
Output-FG .(V.AC)
Operating Temperature
Storage Temperature
Environment
Temperature Coefficient
Humidity
MTBF
Vibration
APF80-12S
APF80-15S
APF80-24S
APF80-48S
80W
90-305 VAC or 120-430 VDC
47-63 Hz
0.85 A max. (115 VAC) / 0.425 A max. (230 VAC) / 0.4 A max. (277 VAC)
40 A max. (115 VAC) / 70 A max. (230 VAC)
<0.75 mA max.
PF>0.97 (115 VAC) / PF>0.9 (230 VAC) at Full Load
12V
15V
24V
48V
6 ~ 12V
7.5 ~ 15V
12 ~ 24V
24 ~ 48V
±2%
6666
5333
3400
1700
3333 ~ 6666
2667 ~ 5333
1700 ~ 3400
850 ~ 1700
±1%
±1%
150mVp-p
87%
25 ms min.
150mVp-p
88%
150mVp-p
89%
200mVp-p
90%
Auto recovery
Auto recovery
Auto recovery
Auto recovery
3750V
1880V
500V
-40°C…+70°C (with derating)
-40°C…+85°C
±0.02%/°C ( 0~50°C )
95% RH
>100,000 h @ 25°C (MIL-HDBK-217F)
10~500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes.
APF80-54S
54V
27 ~ 54V
1500
750 ~ 1500
200mVp-p
90%
1. All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-1-