ANCN_16 Datasheet, PDF (1/4 Pages) Arch Electronics Corp. – Switching Power Module for PCB Mountable

ANCN SERIES
VER : A_4 update : 2015.11.27
AC-DC Power Module
15 Watts
KEY FEATURES
 Switching Power Module for PCB Mountable
 Fully Encapsulated Plastic Case
 Universal Input Range 90-264VAC
 <0.3W No Load Input Power
 High Average Efficiency (25%, 50%, 75%, 100% Load Points)
 Isolation Class II
 Isolation 4KV AC
 CE, UL, Approval
 3-Year Product Warranty
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No. ( Single Output )
ANCN-5S
ANCN-12S
ANCN-15S
ANCN-24S
Max Output Wattage (W)
Voltage
15W
90-264 VAC or 120-370 VDC
Frequency (Hz)
50 / 60 Hz
Input
Current (Full load)
Inrush Current
315 mA max. (115 VAC) / 195 mA max. (230 VAC)
15 A max. (115 VAC) / 30 A max. (230 VAC) (cold start)
Leakage Current
0.25 mA max. (at <240 VAC)
External Fuse (mandatory)
1.5 A slow blow type
Voltage (V.DC.)
5V
12V
15V
24V
Voltage Accuracy
±2%
Current (mA) max
3000
1250
1000
625
Output
Line Regulation (LL-HL) (typ.)
Load Regulation (10-100%) (typ.)
±0.5%
±1%
Maximum Capacitive Load (at 100-240 VAC) 1100uF
200uF
200uF
47uF
Ripple & Noise (typ.)
100mV (Vp-p)
120mV (Vp-p)
200mV (Vp-p)
240mV (Vp-p)
Efficiency (at 230 VAC)
78%
82%
81%
82%
Over Power Protection
Hiccup technique, auto-recovery
Protection
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup mode, indefinite (automatic recovery)
Isolation
Input-Output (V.AC)
4000V
Operating Temperature
-40°C…+70°C (with derating)
Storage Temperature
-40°C…+85°C
Environment Temperature Coefficient
±0.02%/°C
Humidity
95% RH
MTBF
>450,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
2.91 x 2.13 x 0.86 Inches ( 74.1 x 54.1 x 21.8 mm ) Tolerance 0.5 mm
Physical
Case Material
Weight
Plastic resin (flammability to UL 94V-0)
114 g
Cooling Method
Free air convection
Safety
Agency Approvals
UL/cUL, CE
EMC
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
EN 55022 class B
EN 55024
NOTE
1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
2. It's necessary to add Varistor 14S471K at L / N input side in parallel.
3. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-1-