APU4006 Datasheet, PDF (1/8 Pages) Aplus Intergrated Circuits – 4-Bit Micro-Controller with LCD Driver, 1K Word

APLUS
APU4006
4-Bit Micro-Controller with LCD Driver, 1K Word
FEATURES
· Very low current dissipation.
· Wide operating voltage range.
· Supports both Ag and Li batteries.
· Powerful instruction set.
· 4-level subroutine nesting (including interrupt).
· 4 event driven interrupts, 2 external and 2 internal.
· ROM size: 1024 x 15 bits.
· RAM size: 48 x 4 bits.
· Input ports: 1 port/ 4 pins (M-PORT).
· Control output: ALARM.
· LCD driver outputs (can drive up to 60 LCD segments).
· Mask option to select 3 LCD drive modes: static, duplex 1/2 duty 1/2 bias, 1/3 duty 1/2 bias.
· Mask option permits LCD driver output pins to be used for DC output ports. Up to 20 pins are
available. SEG13-SEG20 can be selected by open-drain output.
· Segment PLA circuit permits any layout on the LCD panel.
· Built-in clock generator (crystal or RC).
· Built-in voltage doubler, halver.
GENERAL DESCRIPTION
TheAPU4006is a single-chip 4-bit microcontroller with LCD drivers. It can drive up to 3 common time
20 segments, i.e. 60 segments LCD driver. This 4-bit microcontroller contains a 4-bit parallel
processing ALU, 1024 x 15-bit program ROM, 48 x 4-bit data RAM, input ports, alarm driver, timer,
clock generator, crystal and RC oscillator circuit, LCD driver and 70 powerful instructions in a single
chip. It uses HALT instruction to stop all internal operations other than the timer, clock generator,
crystal/RC oscillator and LCD driver. Very low current dissipation can be easily achieved by
combining 4 types of interrupt function and HALT instruction to minimize the operation cycle.
BLOCK DIAGRAM
ALARM
M1~4
COM 1~3
SEG1~20
VDD1~2
OUTPUT
PORT
INPUT
PORT
LCD DIRVER
SEGMENT PLA
OSC
IN
OSC
OSCILLATOR
OUT
4 BITS DATA BUS
6 BITS PRESET
TIMER
ALU
RAM 48 X 4 BITS
CUP 1
CUP 2
PRE-DIVIDER
CONTROL
CIRCUIT
RESET INT
10 BITS PROGRAM
COUNTER
4 LEVELS STACK
INSTRUCTION
DECODER
PROM
1024 X 15 BITS
1/8