CO518-10 Datasheet, PDF (5/5 Pages) API Technologies Corp – Octave Band and Broadband

hybrids
Wirepac^® 3dB Quadrature Hybrids
• Drop-in, surface mount and flanged options • Low loss, low cost
• Ready to install
• Aerospace and commercial heritage
• High power handling capability
Electrical Specification
Part Number
(see Part Number Key)
Bandwidth Optimization
Coupling, Coupled Path (dB)
Unbalanced, Max. (dB), Coupled Path to Main Line
Insertion Loss Max. (dB)
Isolation, Min. (dB)
Directivity, Min. (dB)
VSWR, Max.
Power, Average (W)
Power, Peak (kW)
Phase Quadrature Error, Max. (°)
Dielectric Breakdown, Min. (V RMS)
* Shield finish code — see Part Number Key.
FA*1
KC*1
LC*1
Narrow
3.00 ±0.15
0.3
0.2
30
27
1.1:1
500
2.5
±1
1000
KC*2
LC*2
Octave
2.70 ±0.15
1.1
0.2
30
27
1.1:1
500
2.5
±1
1000
Electrical specifications summarized in the table above are determined by measurements at 300 MHz in a matched 50 ohm system and are
independent of physical length and frequency with the exception of power. At jacket temperatures above 55°C, the power should be derated
linearly to 50% at 105°C and to 0 at 155°C.
KC*1, LC*1
Mechanical Specification
FA*1
KC*2, LC*2
Weight ounces (grams) per inch/mm
0.15 (4,3)
0.11 (3,0)
FA (Flanged)
KC (Round), Crossover & Non-Crossover
LC (Square), Crossover & Non-Crossover
All dimensions shown in decimal inches (mm). Specifications subject to change without notice.
For mounting instructions, additional specifications or other products, visit us online or contact the factory.
SpectrumMicrowave.com • 1.603.459.1600