PSM Datasheet, PDF (2/2 Pages) Wall Industries,Inc. – Open Frame 40~65 Watts Single Output AC/DC Medical Power Supply

Surface Mount Low Pass Filters
PSM Series
PSM Ordering Information
Example: PSM4-402Z-20T0
PSM
4
-
402Z -
20
T
0
Style
PSM (Power)
Circuit
Configuration
1 - Pi
4 - Feed-through
¦ Also available through API’s
authorized distributors.
Capacitance
Code
680M
101M
131P
471P
821M
102M
152M
252P
402Z
103Z**
Value*
68 pF
100 pF
130 pF
470 pF
820 pF
1000 pF
1500 pF
2500 pF
4000 pF
.01 µF
Tolerance
±20%
±20%
+100/-0%
+100/-0%
±20%
±20%
±20%
+100/-0%
+80/20%
+80/-20%
Current
Rating
Packaging
10 - 10 Amps
(Pi)
T - Tape and reel
packaging
20 - 20 Amps
B - Bulk packaging
(Feed-through)
* Other capacitance values
available as special order.
** Available in Feed-through circuit only.
Tape and Reel
0 - 500 pieces
2 - 2,000 pieces
Note: Tape and reel
packaging -
500 pieces (7")
and 2,000
pieces (13")
Technical Notes
s Soldering recommendations supplied upon request
s Reflow temperature limit is 250°C
s Unit weight is approximately 0.4 grams
s Tape and reel packaging available for automated assembly
PSM Recommended Board Pattern
PSM Tape and Reel Packaging
.150
(3.81)
.013
(0.33)
.059
(1.50)
.079
(2.00)
.157
(4.00)
.295
(7.50)
.069
(1.75)
.320
(8.13)
.315
(8.00)
.630
(16.0)
.133
(3.38)
.059
(1.50)
Dimensions in inches (mm)
Solder paste pattern
Recommended pad,
must be able to support
continuous signal current
X = 0.350" minimum for 1 oz. copper
X
(0.036 mm thickness)
X = 0.200" minimum for 2 oz. copper
(0.071 mm thickness)
For low current (10 Amp or less)
X = 0.130" minimum for 1 oz. copper
(0.036 mm thickness for 10 Amp
and 0.5 oz. copper - 0.018 mm
thickness for 5 Amp or less)
Dimensions in inches (mm)
.285 (7.25)
.070 (1.75)
.050
(1.27)
.040
(1.00)
min.
.100 (2.54)
.125 (3.20)
0.10
(2.54)
120°
.065
(1.65)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: [phone] • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: [phone] • Fax: [phone]
SM15