WNMP1018 Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL WNMP1018
Available as: WNMP1018, 0.625” Sq. 10 Pin Surface Mount - Gullwing
BXMP1018, SMA Connectorized Housing
Features
! High IP3: +44 dBm Typical
! High IP2: +75 dBm Typical
! High Output Power: 28 dBm Typical
Typical Intermodulation Performance at 25 º C
Second Order Harmonic Intercept Point ....... +80 dBm (Typ.)
Second Order Two Tone Intercept Point ........ +75 dBm (Typ.)
Third Order Two Tone Intercept Point ............ +44 dBm (Typ.)
Specifications
CHARACTERISTIC
Frequency
TYPICAL
Ta= 25 ºC
1 - 100 MHz
MIN/MAX
Ta = 0 ºC to +30 ºC
1 - 100 MHz
Gain (dB)
15
14.5 Min.
Power @ 1 dB
Comp. (dBm)
+28
Reverse
Isolation (dB)
-22
+26 Min.
-20 Max.
VSWR In
Out
1.5:1
1.5:1
2.0:1 Max.
2.0:1 Max.
Noise figure (dB)
4.2
5.0 Max.
Power Vdc
+15
+15 Min.
mA
245
275 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Maximum (No Damage) Ratings
Ambient Operating Temperature .............. -55ºC to + 100 ºC
Storage Temperature ............................... -62ºC to + 125 ºC
Case Temperature ................................................. + 125 ºC
DC Voltage ......................................................... + 18 Volts
Continuous RF Input Power ................................. + 16 dBm
Short Term RF Input Power .... 200 Milliwatts (1 Minute Max.)
Maximum Peak Power .................... 0.2 Watt (3 µsec Max.)
Typical Performance Data
17
16
15
14
13
Start 1 MHz
Gain (dB)
Stop 100 MHz
Reverse Isolation (dB)
-5
- 10
- 15
- 20
- 25
Start 1 MHz
Stop 100 MHz
1 dB Comp. (dBm)
30
29
28
27
26
Start 1 MHz
Stop 100 MHz
2.0
1.5
1.0
Start 1 MHz
Input VSWR
Stop 100 MHz
Noise Figure (dB)
5.5
5
4.5
4
3.5
Start 1 MHz
Stop 100 MHz
Output VSWR
2.0
1.5
1.0
Start 1 MHz
Stop 100 MHz
Legend
+ 25 ºC
+ 30 ºC - - - - - - 0 ºC
2707 Black Lake Place, Philadelphia, PA 19154
TEL [phone] · · · · FAX [phone]
4/08/04