TMJ9911 Datasheet, PDF (1/1 Pages) Spectrum Microwave, Inc. – RF Limiting Amplifier

ANALOG LEVEL
DETECTOR TMJ9911
Available as: TMJ9911, 5 Pin TO-8 (T5)
TNJ9911, 4 Pin Sq. Surface Mount (SM3)
BXJ9911, SMA Connectorized Housing (H6)
Features
! -120 mV Output for -10 dBm Input Power
! ±1.0 dB Flatness
! Operating Temp. 0 ºC to +50 ºC
! Environmental ScreeningAvailable
Specifications
CHARACTERISTIC
TYPICAL
MIN/MAX
Ta= 25 ºC Ta = 0 ºC to +50 ºC
Detected Voltage (mV)
f = 500 MHz *^
-120
-90 Min.
Flatness (referred to Input)(dB)
f = 10 - 1000 MHz *^
±0.7
±1.5 Max.
Variation over Temperature (dB)
(referred to input) f=500 MHz*^
±1
Tangential Sensitivity(TSS)(dBm)
f= 500 MHz, BW_VID = 1 MHz*
-32
Input VSWR, 50 Ohm
f = 10 - 500 MHz
1.5:1
Output Offset Voltage (mV)
I_D = I_REF = 50 µA, no RF Drive
±10
Differential Voltage Tracking(mV)
±5
Output Capacitance (pf)
1000
-30 Max.
1.5:1 Max.
±15.0 Max.
1300 Max.
Power
Vdc
+15
mA
16
+15 Min.
20 Max.
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +125 ºC
Storage Temperature .................................-62ºC to +150 ºC
Bias Current (Diode) ................................................... 1 mA
Continuous RF Input Power .................................. +17 dBm
Short Term RF Input Power ........... 100 mW (1 Minute Max.)
Note: Care should always be taken to effectively ground the case of each unit.
* I_D = 50 µA, R = 10 kOhm
^ P_IN = -10 dBm (RF Input)
Typical Performance Data
Output Voltage vs Input Power @ 500 MHz (mV)
1000
100
500 MHz
RL = 10kOhm ID = 50µA
10
-20
-10
-5
0
+5
+10
Input Power (dBm)
Output Voltage @ -10 dBm Input Power
-150
-140
-130
-120
-110
-100
PD = -10 dBm
I _D = 50µA
Start 10 MHz
2.0
VSWR
Stop 2000 MHz
Legend
+ 25 ºC
1.5
+ 50 ºC - - - - - - 0 ºC
1.0
Start 10 MHz
Stop 2000 MHz
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]