TM7279PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM7279PM
Available as:
TM7279PM, 4 Pin TO-8 (T4)
TN7279PM, 4 Pin Surface Mount (SM3)
FP7279PM, 4 Pin Flatpack (FP4)
BX7279PM, Connectorized Housing (H1)
Features
! Superior Phase Noise Performance
! High Output Power: +23 dBm Typical
! High Third Order Intercept: +36 dBm Typical
! Operating Temp. -55 ºC to +85 ºC
! Environmental Screening Available
Specifications
CHARACTERISTIC
TYPICAL
Ta= 25 ºC
MIN/MAX
Ta = -55 ºC to +85 ºC
Frequency (MHz)
5 -300 MHz
5 -300 MHz
Gain (dB)
Power @ 1 dB
Comp. (dBm)
Reverse
-Isolation
VSWR
In
Out
14.0
+23.0
-15.5
<1.5:1
<1.5:1
12.5 Min.
+21.0 Min.
-14.5 Max.
2.0:1 Max.
2.0:1 Max.
Noise Figure (dB)
<4.5
Power
Vdc
+15
mA
88
6.0 Max.
+15
95 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ...... +52 dBm (Typ.)
Second Order Two Tone Intercept Point ....... +46 dBm (Typ.)
Third Order Two Tone Intercept Point ........... +36 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +18 dBm
Short Term RF Input Power ............. 50 mW (1 Minute Max.)
Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
* ^{Guaranteed Phase Noise Performance (dBc/Hz)}
Frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
Typical
-165
-175
-175
-178
-178
Guarantee (min.)
-160
-170
-172
-174
-174
16
Gain (dB)
Typical Performance Data
0
Reverse Isolation (dB)
-130
Phase Noise (dBc/Hz)
15
- 10
-140
14
- 20
-150
13
- 30
12 _{Start 5 MHz}
Stop 300 MHz ^{- 40} Start 5 MHz
-160
Stop 300 MHz
1 dB Comp. (dBm)
+25
7
Noise Figure (dB)
-170
+24
+23
+22
+21 _{Start 5 MHz}
2.0
1.5
1.0 _{Start 5 MHz}
6
5
4
Stop 300 MHz ³ Start 5 MHz
Input VSWR
2.0
1.5
Stop 300 MHz ^1.0 Start 5 MHz
-180
-190
100
1K
10K
100K
1M
Stop 300 MHz
Output VSWR
_________Guarantee __ __ __ __Typical
Residual Phase Noise Test Conditions:
Stop 300 MHz
! Carrier Frequency: 100 MHz
! Power Output +23 dBm
! Temperature: 25 ^oC
! Agilent ES5500 System
Legend
+25 ºC
+85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]